The temperature control card is mainly composed of two parts: the temperature sensor and the control board. The temperature sensor detects the real-time temperature and sends it to the control board. The control board compares the received temperature with the set temperature. If it's below the set temperature, the control board activates the electric heating device. Once the set temperature is reached, the control board stops the electric heating device.

I. Technical Specifications:

1. Working Voltage: 12-24VDC

2. Operating Current: ≤10A

3. Temperature Setting Range of Temperature Control Card: -55℃~99℃。

4. Dimensions: 40×20×12.5(Units:mm）

5. Installation Hole and Hole Diameter Diagram

6.Sensor Size: 30×3.5×0.5(Units:mm）

7. Power Terminal: Three-wire terminal block, spacing3.5mm。

TwoThermal control card and electrical heating glass wiring diagram

III. Cautionary Notes:

1. Temperature control card wiring,Anti-static measures must be in place to prevent static discharge from damaging the chips.

2. No live wiring or live sensor plugging/unplugging allowed.