Perimeter sod is a type of artificial grass that is applied to the wall of a municipal construction site's perimeter fence. It is widely used in many city planning and construction projects, and it boasts the following four main advantages:
1. Hoarding greenery not only provides an eye-catching green aesthetic but also prevents unauthorized张贴 of small advertisements on the hoarding.
2. The simulated grass fencing has a surface similar to grass, providing a soft touch that effectively prevents pedestrians from accidentally scraping themselves. It also resists paint chipping due to wind and sun exposure, enhancing the city's appearance.
3. Appearance is more environmentally friendly and aesthetically pleasing, less prone to scratches and damage, and easier to clean; internally, it's constructed with steel, which is less likely to tip over, with an overall lifespan of several years. Initial construction costs are
The initial hoarding was similar, but the later maintenance costs significantly decreased.
4. Additionally, it not only beautifies the urban environment but also serves as an environmental protection measure by controlling dust and absorbing noise.
In many cities' special rectification campaigns in urban areas, many hoardings have been upgraded to grass-covered hoardings, beautifying the cityscape. The previous hoardings on both sides of the road were gray, though newly installed, their dark color was often oppressive to passersby.
Now with the greenery screen added, it looks much more lively; every time I pass by, it seems to bring the freshness of spring breeze to my face. Previously, there were promotional posters on the screen, which were nice at first, but over time, they inevitably suffered from damage and fading. Now, the screen has been replaced with greenery.The skin, first and foremost, feels less jarring. While the setting and beautification of hoarding may not be a key step in urban construction, it is an important window for showcasing the city's civilization. A well-groomed hoarding after careful beautification is a pleasure to look at!
Once the hoarding turf arrives at the site, it is crucial to ensure it does not get rained on. Maintaining the mat surface dry is essential. The adhesive will not hold after rain, and it affects the durability of the back glue. Let the turf dry in the sun for half a day before laying it out.To minimize creases in the lawn, this method ensures a high heat resistance and flatness, which is more conducive to installation. The installation of perimeter lawn typically uses nails or adhesive glue, each with its own pros and cons. The former offers quick installation but is prone to cracking and seam separation.The installation is slower, but the flatness is high, and the construction quality is good. The appropriate paving method can be chosen based on different project deadlines.
1. During installation, apply adhesive 10-20 cm wide along all four sides of the lawn. Use double-sided adhesive, meaning both the back of the lawn and the corresponding wall must be coated. Ensure even application. After applying the adhesive, let it dry for about 20 minutes until it's not sticky to the touch. Align accordingly.After wall installation is completed, use a rubber mallet to press and compact the glued areas to ensure a tighter bond.
2. When applying the glue, be sure to use it moderately; don't apply too much, of course, nor too little. Too much will prolong the drying time, and in extremely rare cases, it may also cause the edges to lift. After applying the glue, let it dry for about five to ten minutes.Alright, or you can first test the bonding strength with a small piece. Generally, when the bonding strength is strong, it's difficult to pull apart after bonding, and you can proceed with the bonding when you see the glue pulling strings after separation. At this time, the surface being coated with adhesive isThe glue is no longer flowing; it's mostly dried.
3. During cutting, align the seams of the lawn grass and pull it taut for a smooth finish. Ensure the grass fibers are pointing in the same direction to avoid visual color discrepancies. After attaching the perimeter lawn to the wall, reinforce it by nailing every 30-50 cm on each side.
4. After installing the artificial turf fence, various fonts or patterns of promotional slogans can be nailed onto it.
