Lightweight partition board installation machine

I. Product Application

The wall panel installation machine is suitable for the installation of various upright panels such as cement boards, lightweight composite partition boards, and ceramic ball boards.

II. Product Features

The wall panel installation machine is equipped with rotating support bearings and a rotating hydraulic motor. The fixture part can rotate 360 degrees like a wood grabber, capable of lifting partition panels from a horizontal to a vertical position. The upright panel installation machine can both install panels vertically and move horizontally parallel to position the partition panels properly.

Three: The panel installation machine features full electric forward and reverse movement. The front wheels are two driven wheels, and the rear wheels are two steering wheels, offering flexible steering and a small turning radius. The panel installation machine is equipped with 4 gears: high speed, medium speed, and low speed. Additionally, there is a reverse gear. The speed is adjustable, allowing for quick or slow movement as desired. For alignment, low speed is recommended, as it ensures accurate alignment and facilitates installation.

Four, the slab installation machine features a fully hydraulic clamping mechanism with strong clamping force. The fixtures are equipped with anti-slip pads to ensure that the heavy loads will not slip. The lifting mechanism of the installation machine uses the forklift principle, providing ample power to lift up to 700 jin of ALC panels. The sliding mechanism allows the partition panels to move in the left and right directions, quickly aligning the male and female grooves. Compared to other manufacturers' slab machines, it adds installation functionality, allowing a one-step transition from slab to installation, with full hydraulic automatic operation.