Lightweight partition panel installation machine manufacturer

I. Product Applications

The wallboard installation machine is suitable for the installation of various upright panels, including cement boards, lightweight composite partition boards, and ceramsite boards, etc.

Section II: Product Features

The wall panel installation machine is equipped with a rotating support bearing and a rotating hydraulic motor. The fixture part, similar to a wood grabber, can rotate 360 degrees, enabling it to lift partition panels from a horizontal to a vertical position. The upright installation machine can both vertically install panels and move left or right parallelly to properly position the partition panels.

Three, the solid board installation machine features full electric forward and reverse movement. The front wheels are two drive wheels, and the rear wheels are two steering wheels, offering flexible steering and a small turning radius. The wall board solid board installation machine is equipped with 4 gears: high speed, medium speed, and low speed. Additionally, it includes a reverse gear. Speed is adjustable, allowing for fast or slow movement as desired. For alignment, use the low speed, as it provides accurate alignment and facilitates installation.

Four, the vertical panel installation machine features a full-hydraulic clamping mechanism with strong clamping force. The clamps are equipped with anti-slip pads to ensure that the heavy loads do not slip. The lifting mechanism of the installation machine utilizes the forklift principle, providing ample power to lift up to 700 jin of ALC panels. The sliding mechanism allows the partition panels to move left and right, quickly aligning the male and female grooves. Compared to other manufacturers' vertical panel machines, it adds installation functionality, going from vertical panel to fully installed in one go with full hydraulic automatic operation.