What is the price? 350A diesel generator welding machine has high production efficiency: on the one hand, the conductive length of the welding wire is shortened, the current and current density are increased, so the arc depth and welding wire deposition efficiency are greatly improved. On the other hand, due to the insulation effect of flux and slag, there is basically no heat radiation loss and less splashing in the arc. Although the heat loss for melting flux has increased, the overall thermal efficiency still greatly increases.
High weld quality: The slag is isolated from the air for protection, and the welding parameters can be automatically adjusted to maintain stability. The requirements for the welder's technical level are not high, and the weld composition is stable with good mechanical properties.
Good working conditions: In addition to reducing the labor intensity of manual welding operations, it has no arc radiation, which is the advantage of submerged arc welding.
It can achieve automatic welding. Continuously feed welding wire into the welding area, transmit welding current, make the arc move along the seam, control the main parameters of the arc, control the start and stop of welding, apply welding flux to the welding area, and adjust the position of the end of the welding wire before welding.
During automatic welding: Welding parameters can be kept stable through automatic adjustment. Compared with manual arc welding, the dependence of welding quality on the skill level of welders can be greatly reduced.
Technical parameters
Product model: TO350A
Generator parameters
·Rated power KW 5
·Backup power KW 6
·Rated frequency HZ 50
·Rated voltage V 220
·Starting method: Electric start
·Institution type: Open shelving
·Phase number single/three-phase
Welding machine parameters
·Current regulation A 0-350
·Welding rod range MM 0-8.0
·Welding module industrial welding module
·No load voltage V 70
·Welding machine grade: industrial grade
·Machine fuel consumption G/KW. H 200 (full load)
·Working hours H 8~12
·Industrial grade noise reduction device
Diesel engine parameters
·Engine brand Daze Power
·Engine model TO350
·Cooling method: air cooling
·Rated speed r/min 3000
·Combustion system and cylinder structure with dual cylinders, direct injection, and air cooling
·Engine horsepower 25HP
·Fuel type: diesel
Other parameters
·Connection method: taper axis, rigid connection
·Fuel tank capacity 37L
·Oil capacity L 2.65
·Speed regulation method: automatic speed regulation
·Overload protection is available
·Leakage protection has
·Insulation level F
·Current adjustment knob adjustment
Overall appearance and weight noise
Size (without wheels)
Length mm 935
Width mm 620
Height mm 690
Net weight of the whole machine KG 285
Welding Machine Grade A - Industrial Grade
The standard configuration of the generator welding unit is as follows
Voltage, welding current regulation, frequency, machine operation indication, cooling fan, safety protection:
Start the battery and the battery starting connection cable;
Welding rod functions: 506, 507, ordinary welding rod, cellulose welding rod, alkaline welding rod, low hydrogen welding rod, carbon welding rod, stainless steel welding rod, etc.
Usage conditions: Environment -35-55 degrees Celsius: altitude within 2000 meters.
TO Daze diesel engine: dustproof, sand proof, shock resistant, and has good environmental adaptability!
Auxiliary power: 5KW/50HZ auxiliary power output, can be equipped with lighting, handheld drill, water pump, etc.
Optional accessories (additional cost)
High frequency diesel version welding machine rare earth permanent magnet motor
High altitude fuel injection pump 4000-6000 meters high power version TO engine
Execution standard: International standard certification ISO9001:2000 Industry execution standard GB/T2820.1997
Has the following characteristics:
1. Continuous welding
2. Arc voltage prediction
3. Reliable square wave arcing
4. Arc voltage and current feedback
5. Optimized circuit breaker voltage
6. Compensation for power supply voltage fluctuations
7. Voltage drop compensation for long-distance welding cables
8. High power factor compensation when power is too low
9. Equipment design structure is easy to maintain
10. Control voltage 24V
