Automatic mineral water bottling equipment manufacturers use magnetic clutch to tighten the cap, with adjustable torque to ensure the quality of the cap rotation. All parts in contact with liquids are made of stainless steel, meeting food hygiene requirements. Automatic mineral water bottling equipment manufacturers introduce that the cap tightening machine of the automatic mineral water bottling equipment manufacturer is driven by a reducer to rotate the turntable. The cap is ejected from the hopper under the action of centrifugal force. At the exit, there is a cap separation device that automatically separates the caps when the reverse cap passes, and the reverse cap is blown into the hopper by air. Only the correct cap can smoothly enter the slide track, and the number of caps in the hopper is automatically detected by a photoelectric switch to control the cap feeding machine to ensure the best cap placement. Once the correct cap enters the slide track, it can smoothly enter the feeding disc. To prevent accidents, a reverse cap prevention disc is also configured on the slide track, ensuring that the caps entering the feeding disc are correct. A pair of photoelectric switches are also configured on the slide track, which immediately stop the main machine when no cap is detected. To effectively remove caps without anti-theft rings and clean the excess caps during the hopper cleaning, there is a movable exit opposite the hopper exit to meet this function. The bottles of the automatic mineral water production line are conveyed through the air conveying channel and then transferred to the filling machine of the three-in-one machine by a bottle star wheel. The filling machine's rotating disc is equipped with bottle clamps that hold the bottle mouth along a guide rail and flip 180°, making the bottle mouth face down. In a specific area of the filling machine, the filling clamp nozzle sprays filling water to rinse the inner wall of the bottle. After rinsing and draining, the bottle is held by the bottle clamp and flipped 180° along the guide rail, making the bottle mouth face up. The cleaned bottles are then discharged from the filling machine by the bottle star wheel and conveyed to the filling machine. The bottles entering the filling machine are held by the neck support plate and raised by the cam, then the filling valve is opened by the bottle mouth. The filling is done by gravity filling. After the filling valve is opened, the material is filled through the filling valve, and after the filling is complete, the bottle mouth drops away from the filling valve, and the bottle enters the capping machine through the neck transition sprocket. The anti-rotation blade on the capping machine holds the neck section, keeping the bottle upright and preventing rotation. Features of the automatic mineral water production line: 1. The bottle entry air channel uses a suspended neck clamp method, allowing for fast bottle feeding without deformation. 2. The bottle type adjustment for each part is easy and quick. 3. The touch screen designed with a humanized concept is extremely easy to operate, enabling human-machine dialogue. 4. Apart from the frame, the entire machine is made of high-quality stainless steel, operates smoothly without vibration, has no工艺dead corners, and is easy to clean. 5. A specially designed high-speed filling valve ensures accurate liquid level and no liquid loss, achieving no-bottle-no-filling. 6. The programmable logic controller (PLC) implements automated control of the entire production process, with easy operation and high level of automation. 7. The human-machine control system can perform functions such as cap detection, production speed control, production count, and bottle jam automatic stop. The entire machine is made of 304 stainless steel, which can be used for a long time without rust. The support material is all solid 304 stainless steel, maintaining the equipment's stability during rotation to prevent overall vibration. The water pressure pump we choose is from the stable Southern region, ensuring stable water output and strong pressure to provide good water power for rinsing and filling. The beverage production line can maintain long-term stability. The gears are made of high-quality 304 stainless steel, which is not easily oxidized by air. An oiling system is installed at the turbine rotation port, which can provide timely lubrication for the equipment after a certain period of use. By opening the cover plate under the filling machine, locate the corresponding oiling channel, inject the lubricating oil in a measured amount into the channel, and then start the equipment to rotate the turbine, allowing the lubricating oil to penetrate the interior of the rotating shaft. Features: 1) Uses a rotating intermittent spray rinsing method, from bottle entry conveyance, bottle clamping, inversion, synchronized internal spraying until draining and entering the filling. 2) Uses a unique bottle mouth constant pressure filling method to ensure accurate sealing between the bottle mouth and the filling valve mouth, eliminating the leakage phenomenon caused by bottle deformation or歪斜 and thin bottle walls during the original bottle bottom filling. 3) Uses programmable controller control to achieve automatic control of the entire process from bottle entry to packaging. Main technical parameters: Model: XGF40-40-12 Work stations: Washing 40, Filling 40, Sealing 12 Production capacity: 18,000 bottles/hour (500ml/bottle) Gas source pressure: 0.7MPa Gas consumption: 0.8m³/min Bottle rinsing water pressure: 0.2-0.25MPa Bottle rinsing water consumption: 2 tons/hour Main motor power: 3KW Overall machine power: 4.5KW Dimensions: 3430X2630X2700 (Length×Width×Height) Overall weight: 4500kg