AliveProduct Introduction
Activated Carbon(As shown in the scanning electron microscopy image) is a common carbon-based material with the characteristics of activated carbon. The active coke itself acts as both an adsorbent and a catalyst, and can also serve as a catalyst carrier. In essence, active coke is a low surface area activated carbon, with a surface area typically ranging from 600 to 1000 m2/g. However, among various carbon-based adsorbents, active coke has gained attention due to its relatively low cost, high mechanical strength, and wear resistance. Our company, through years of research and development, has chosen to focus on inorganic molecular sieve adsorption materials, developing low-cost active coke adsorption materials. Simultaneously, we have developed specialized fluidized bed adsorption tower technology and equipment, utilizing adsorption methods to address deep treatment and reuse of industrial wastewater, as well as meeting standards.
Item | Active CarbonTechnical Specifications | ||
JPKL-35 | JPFM-200 | JPKL-90 | |
Moisture, % ≤ | 10 | 10 | 3 |
Iodine Adsorption Value, mg/g | 700 | 700 | 400 |
Specific surface area, m2/g | 700 | 700 | 400 |
SO2 adsorption capacity mg/g | -- | --- | 40 |
Flash Point, °C | -- | --- | 450 |
Wear resistance strength, % ≥ | 90 | --- | 95 |
Filling Density, Kg/m³ | 400-550 | --- | --- |
Ash content, % ≤ | 15 | 15 | 15 |
Compressive Strength: kg/cm² | -- | --- | ≥40 |
Particle Size | 2-5mm | 200 mesh | 9mm |
Material | Coal-based | Coal-based | Coal-based |
【Appearance】:Activated CarbonBlack.
[Standard]: Inspection is based on GB/T7702-2008 national standard, or upon the testing method provided by the customer.
【Packaging】: Outer packaging is made of woven PP plastic bags, while inner bags are made of waterproof PE plastic inner bags.
【Specs】: Product packaging specifications, custom packaging upon customer request, commonly in 25KG/bag or ton bags.
[Note]: Quality specifications for items not listed can be produced to meet the customer's special requirements.
