Key Features:

Mechanical properties

Outstanding compressive strength, flexural strength, especially impact resistance; tough with good bonding strength, hence excellent in preventing delamination and crack resistance.

Chemical Properties

Resistant to erosion from most inorganic and organic solutions; exhibits good corrosion resistance against inorganic acids, organic acids, lactic acid, oleic acid, and fruit acids.

High and low temperature performance

Operable at -40℃ to +120℃ for extended periods, withstands short-term thermal shock up to 150℃.

Hydrophilic Penetration Function

A unique concrete flooring structure formed by the combination of water-based polyurethane and active inorganic materials, allowing water molecules to freely penetrate, nearly completely avoiding bubbling and delamination caused by moisture vapor from the subgrade due to its "breathing" function.

Anti-slip feature

Smoothness and unique textures strike a balance between easy cleaning and slip resistance in wet conditions.

Environmental friendliness

Low-VOC, odorless, and non-toxic, meeting stringent health and hygiene standards.

Excellent construction performance

No primer painting required, quick curing, 20°C application temperature, 8 hours for pedestrian traffic, 48 hours for vehicle traffic.

No need for a very dry concrete subgrade (moisture content < 10%); can be applied on new concrete cured for 7 days.

The construction process emits almost no odor, benefiting the health of operators and preventing odor pollution.

Applicable Locations:

Food processing plants, pharmaceutical manufacturers, humid and dry processing areas, refrigerated and frozen zones, dairy processing factories, breweries, distillation workshops, laboratories, chemical processing plants, pulp and paper industry factories, warehouse and storage area flooring.

Polyurethane mortar flooring advantages:

1. Floor surface effects are available in two series: matte and glossy, with the glossy surface being resistant to stains and easy to clean.

2. The construction environment temperature is broad, generally allowing for work between 0°C and 35°C.

3. Extended operational time, with good leveling properties under favorable conditions.

4. Part A contains pre-mixed color paste, with minimal floor color variation and easy application.

5. The composite material can be stored in the cold winter in the north without the need for thermal storage.