Key Features:

Mechanical properties

High compressive strength, bending strength, especially excellent impact resistance; tough with good bonding strength, thus offering excellent anti-delamination and anti-cracking properties.

Chemical Properties

Resistant to erosion from most inorganic and organic solutions; exhibits good corrosion resistance against inorganic acids, organic acids, lactic acid, oleic acid, and fruit acids.

High and low temperature performance

Operates continuously at temperatures ranging from -40°C to +120°C and withstands short-term thermal shocks up to 150°C.

Hydration Penetration Function

A special concrete floor structure formed by the combination of water-based polyurethane and active inorganic materials, allowing water molecules to penetrate freely, nearly completely eliminating the “breathing” function that causes bubbling and delamination due to moisture in the subgrade.

Anti-slip feature

Smooth and textured surfaces achieve a balance between easy cleaning and slip resistance in wet conditions.

Eco-friendliness

Low VOC, odorless, and non-toxic, meeting stringent health and hygiene standards.

Excellent construction performance

No primer coating required, rapid curing, 20°C application temperature, 8 hours for pedestrian traffic, 48 hours for vehicle traffic.

No need for a very dry concrete base (moisture content <10%); application is possible on new concrete cured for 7 days.

The construction process emits almost no odor, benefiting the health of the operators and preventing odor pollution.

Applicable Locations:

Food processing plants, pharmaceutical manufacturing companies, humid and dry processing areas, refrigerated and frozen storage areas, dairy factories, breweries, distillation workshops, laboratories, chemical processing plants, pulp and paper industry factories, warehouse and storage area flooring.

Polyurethane mortar flooring advantages:

1. The floor surface effects can be chosen from two series: matte and glossy, with the glossy finish being resistant to dirt and easy to clean.

2. Construction environment temperature is wide-ranging, typically allowing for operations between -0℃ to 35℃.

3. Long operational time, with good leveling properties under favorable conditions.

4. Part A contains pre-mixed color paste, with minimal floor color variation and easy to apply.

5. Composite materials can be stored in cold northern winters without the need for thermal storage.