SP Series Submerged Slurry Pumps

ZJL Series Product Introduction

The SP type submersible slurry pump features a single-stage, single-suction, cantilevered structure, connected by bearing seats, support seats, and connecting pipes to the hydraulic components of the pump. The liquid is discharged through the outlet pipe components. The pump impeller is a semi-open impeller with mixing blades at the extension of the impeller blade inlet. The main feature of this pump is that the pump shaft in the submersible section has sufficient rigidity, and there are no bearings or shaft seals between the impeller and the pump casing, allowing it to handle media with high concentrations of solid particles. The pump can be inserted into the liquid up to 800-5000mm in length, and an intake pipe can be provided upon request. The shaft seal is designed for larger pumps to run submerged without a seal. The drive is by a vertical motor mounted on the motor support and the support seat, connected to the pump with a coupling. Belt drive can also be provided according to actual parameter requirements, ensuring flexibility in adapting to pump parameters.

Primarily used for pumping thick liquids, viscous oils, oil sludge, polluted liquids, mud, slurry, flowing sand, and流动污泥in urban drainage ditches in industries such as environmental protection, municipal engineering, thermal power plants, coal gasification plants, oil refineries, steel mills, mining, papermaking, cement factories, food factories, and dyeing and printing. Also suitable for fluids containing silt, sand, and corrosive liquids.