Microcomputer Gray Melting Point Determinator
Model: BYHRD-5A
The Microcomputer Ash Melting Point Tester utilizes a microcomputer to automatically control the ash fusion test process. A camera captures the ash cone image, which is then displayed at a designated position on the computer monitor through image processing technology. The furnace temperature is regulated and controlled by a front-end single-chip microcomputer using PID control, and the temperature is transmitted to the microcomputer system via a serial port, displaying a time-temperature image. Upon completion of the test, you can choose to print the ash cone result image and corresponding temperature data, or save the result file. The test process images and temperature are automatically saved, and are cleared when the next test begins. This instrument is widely applicable in industries such as power, coal, cement, and metallurgy, and currently holds a leading technical position domestically.
Key Features:
1.1 Microcomputer automatic temperature rise control, temperature rise characteristics meet national standard GB219-96.
1.2 The gray cone image is displayed in the image acquisition area of the microcomputer monitor.
1.3 The system features storage and retrieval capabilities for test results.
1.4 Optionally print the gray melting point image and temperature value.
1.5 Automatically store and display the entire experimental process, showing the temperature-rise vs. time curve; the furnace body can be freely rotated for easy sample handling.
1.6 The system operates on Windows 98 and above.
1.7 Auto-judgment Function: Deformation Temperature (DT), Softening Temperature (ST), Hemisphere Temperature (HT), Flow Temperature (FT).
Specification and Technical Parameters:
2.1 High-Temperature Furnace: Horizontal Furnace
2.2 Heating Element: Silicon Carbide Tube
2.3 Heating Power Supply: 220V ±10% 50Hz
2.4 Maximum heating current: 30A
2.5 Maximum heating temperature: 1600°C
2.6 Temperature sensing element: Platinum Rhodium-Platinum thermocouple
2.7 Temperature Control Method: Automatic Adjustment Control
2.8 Heating Rate: 900~1500℃ ±1℃/min
