Industrial Pure Water Equipment EDI Ultra-Pure Water System Fully Automatic Control Quankun Environmental Protection

Before tuning the pure water system, carefully check if the raw water inlet valve, flush drain valve, concentrate drain valve, pure water valve, and RO high-pressure pump inlets and outlets are fully open. Pay attention to gradually adjusting the water flow of pure water and wastewater when the inlet and concentrate drain valves reach half-open during the initial tuning process. The ratio of pure water to wastewater in a single-stage reverse osmosis system should be 1:2, while for a two-stage system, it's 2:3. Always monitor the desalination rate of the membranes to ensure it's at least 98% during this time. Also, during system operation, keep an eye on the security filter pressure gauge. If the pressure increases by more than 0.5 kg/cm2, replace the filter element immediately. This provides strong protection for the system.

Pure water systems play a critical role in food production, widely used in the following stages:

Pure water, as the primary ingredient in beverages, directly impacts both the taste and safety of the product.

During processes like cleaning, steaming, and cooling, pure water helps prevent contamination from impurities and microorganisms, ensuring food safety.

Certain food ingredients require the use of pure water to ensure product quality and stability.

Use pure water for equipment cleaning and disinfection, reducing the use of chemical disinfectants, and ensuring a safer, more environmentally friendly process.

Equipment Advantages:

High and stable water quality output

Continuous uninterrupted water production, not halted due to regeneration

3. No chemical reagents required for regeneration

4. Thoughtful stackable design, with minimal footprint

5. Simple and safe operation

6. Low operating and maintenance costs

7. No acid or alkali reserves and transportation costs

8. Fully automatic operation, no need for dedicated supervision.

The quality control of medical pure water systems is a systematic project involving multiple stages such as design, manufacturing, installation, debugging, verification, and daily maintenance. Excellent manufacturers of medical pure water systems establish rigorous quality management systems, adhering to strict standards and procedures in every step from raw material procurement, production processing, finished product inspection, to after-sales service. Additionally, they conduct regular internal audits and third-party certifications to ensure compliance with both domestic and international regulations and standards. Furthermore, catering to specific customer needs, manufacturers offer customized services to ensure the system seamlessly integrates into the customer's existing environment, achieving optimal operational performance.

Industrial Pure Water Equipment EDI Ultra-Pure Water System Fully Automatic Control Kuan Kun Environmental Protection

Design Features:

The system utilizes full automatic control (manual control is also available), and during operation, automatic backwash and regeneration programs can be set.

2. All unit wiring is completed uniformly at the factory, reducing installation and debugging time.

3. Primary and secondary reverse osmosis systems are equipped with recirculation pipes, and reverse osmosis equipment is fitted with a chemical cleaning unit.

4. Pipes are generally made of UPVC material.

5. Integrated control systems and integrated instrument systems for easy operation and management.

6. RO Membrane Timer Cleaning - Features an on/off switch and timer for RO membrane cleaning, extending the membrane's lifespan.

7. Water Recovery Rate: Through special process design, the equipment's recovery rate has been significantly increased, up to a maximum of 70%.

8. The equipment features an automatic prompt for consumable replacement, and the replacement cycle is dependent on changes in water quality and pressure, not on the usage time of the consumables. This design takes into account the differences in water quality across regions, making it more scientifically sound.

9. Self-protection Function: The source water shortage automatic shutdown protection function features both automatic water production when the water tank is low and automatic shutdown when the tank is full.