I. Overview
The YMP series coal powder spray mill is a new type of coal-fired equipment, mainly used for drying, annealing, reheat furnace, steam, etc. Suitable sites include: steel rolling plants, foundries, rolling mills, cement factories, and boiler industries. It can replace thermal energy equipment powered by oil, gas, and electricity, thereby saving 40-50% of energy. This product can significantly reduce the labor intensity of personnel and has features such as cost reduction and increased economic benefits.
The YMP system coal mill atomizer features a unique one-step completion of processes such as supply crushing and conveying.
Raw coal is processed through a series of crushing techniques to become powder particles between 80-120mm, which are then sent into the furnace at a pressure of over 130mm water column by the fan blades, suspended for combustion to achieve complete combustion. This contributes to the environmental protection and energy-saving cause. 2. Main Technical Parameters
| Model SpecificationModel | Coal powder spray volumePulverized coal injection volume(kg)/Hour(s)(Kg / h) | Spray PressureJet pressure(millimeters).Water Jet (Column)Mm. Water column | AirflowBlowing Rate(m3/Hour(s) | Coal powder particle sizePulverized coal particle size(mm) | Motor PowerMotor Power(KW) |
| FMP130-3 | 80-140 | 130 | 1300 | 0.08 | 4kw-4 |
| FMP150-3 | 110-160 | 130 | 1300 | 0.08 | 4kw-4 |
| FMP180-3 | 100-180 | 130 | 1500 | 0.08 | 7.5kw-4 |
| FMP250-3 | 170-230 | 130 | 1700 | 0.08 | 11kw-4 |
| FMP300-3 | 200-250 | 130 | 1800 | 0.08 | 11kw-4 |
| FMP500-3 | 350-500 | 130 | 2000 | 0.08 | 15kw-4 |
| FMP650-3 | 500-650 | 130 | 2300 | 0.08 | 17kw-4 |
| FMP750-3 | 650-800 | 130 | 2600 | 0.08 | 22kw-4 |
| FMP1000-3 | 800-1000 | 130 | 3000 | 0.08 | 24kw-4 |




























