I. Overview

GravitySifterAlso known asGravity Selection SifterUtilizing airflow, gravity, and changes in airflow direction, this equipment achieves separation of materials ranging from 0 to 5mm. These separators combine the use of gravity, inertia, centrifugal force, and aerodynamics to classify materials with particle sizes between 0-5mm. The feed material and primary air enter the separator from the top and flow downward. The airflow is redirected by 120 degrees, carrying fine particles away from the separator via the blades. Coarse particles, which cannot be redirected with the airflow due to their own gravity, fall to the bottom of the separator and are then discharged through a valve. Secondary air is blown into the separator from below the blades, forcing its way through the curtain of falling particles. These coarse particles near the separation point are redirected by the secondary air flow and enter the vortex within the heart-shaped chamber. Fine particles captured upon entering the separator and other particles pulled out from the vortex are all carried by the exhaust air into the collector.Pulse Jet Bag Filter) Post-processing recycling. The secondary air throttle valve features a simple manual adjustment function, allowing for the alteration of fine particle gradation. Within the material flow range, there are no moving parts, thus requiring minimal maintenance. For erosive materials, linings are used in certain areas to ensure a longer service life of the equipment.

Function: Designed for separating dust content in materials below 0-5mm, capable of controlling dust content to less than 1%.

1. Easy adjustment with 4 control points: material cascade, primary air intake, secondary air intake, and air volume output. Allows for convenient control of both air volume and finished product's powder content.

2. Energy-efficient, previous configuration was separator + dust removal, but this model has no motor, with the main power reflected inDust collectorAbove, it can save on power input.

3. Simple structure with minimal contact points for main materials; all wear areas feature Salt Rich's self-developed wear-resistant treatment, ensuring low wear. Maintenance-free with low maintenance costs.

Section 2: Gravity Separator is suitable for: 

1. Produce artificial sand by dry processing limestone powder and aggregates, as an alternative to natural sand.

2. Increase sieve throughput to boost production output.

3. Material particle size maximum of 5mm, fine particles below 75 micrometers (200 mesh) grade.

Section 3: Key Benefits for Main Customers of Gravity Separator Machines

Low maintenance and operation costs.

2. Reduce moisture content, minimize cost;

3. Expanding additional markets for -200 mesh particle materials.

IV. Main Characteristics of Gravity Separator Machine

1. No transmission components are included within the scope of the material flow.

2. Lining Board - Wear-resistant Steel Plate

3. Reduce the sedimentation pond load or eliminate the sedimentation pond.

V. Technical Performance and Parameters