Spring-Loaded Fixed Thermocouple Structure Principle
The WRET-01 thermocouple operates on the same principle, graduation characteristics, allowable deviations, temperature compensation at the reference end (cold junction), and connection methods to the display measuring instrument as standard thermocouples.
The WRET-01 type thermocouple is composed as shown in the diagram, including a protective tube, installation bolt, locking sleeve, spring, and thermocouple wires, etc.
Spring-Loaded Fixed Type ThermocoupleInstallation Method
The installation method for the WRET-01 type thermocouple is shown in the figure. It is fixed on the surface of the object being measured, and the connecting bolts are first tightened onto the object.On the object, place the thermocouple close to the item being measured, tighten the clamp nut, and finally, secure the locking clamp.
Spring-Loaded Fixed ThermocoupleModel and Specifications
Model | Fractional pitch | Temperature Range: ℃ | Hot response time t0.5s | Protective Tube Material | |
WRET-01 | E （ EA-2 ） * | 0~400 | <5 | Stainless Steel 1Cr18Ni9T | |
Specs | Connect Bolt L 2mm | ||||
Total Length Lmm | Protective Tube | 1 mm | ||||
| 1000 1500 2000 2500 3000 3500 4000 | 30 30 30 30 30 30 30 | 35 or 70 | |||
| 1000 1500 2000 2500 3000 3500 4000 | 60 60 60 60 60 60 60 | ||||
Note: When placing an order, please specify: 1) Product name and model 2) Total length and depth (L*L1*L2) 3) Use an asterisk (*) to indicate special specification orders.
