Machine Model: LT-802   Sheet material tensile testing machine     One.Sheet material tensile testing machineDescription     The Non-Metallic Sheet Material Tensile Testing Machine is designed for tensile tests on materials such as rubber, soft plastics, films, or similar materials, using specialized fixtures. It complies with the requirements for dumbbell-shaped test specimens in standards GB528, GB529, and other industry standards. The features of the sheet material tensile testing machine fixtures include customized tooth shapes and materials for different materials, applying pre-tension as required, while ensuring no axial gap is generated during the tensile process and the specimen is not broken when it fractures. Due to the characteristics of non-metallic sheets with high elongation and relatively low tensile strength, we recommend using a tensile force of 2500N with a larger stroke.   LT-802 Model   Testing machine.

Section IISheet material tensile testing machineTechnical Specifications
Sensor Large Range: 2500N (Customizable according to specific material properties)
2. Test Force Resolution: 1/10000
3. Test Force Indication Error: ±0.5%
4. Large deformation indication error: ±1%
5. Displacement speed range: 5-500 mm/min
6. Test Space: 900mm (including clamp)
7. Test Width: 350mm
8. Power Supply: 220V / 50Hz
9. Power: 400W
10. Machine dimensions: Approx. 540×900×1600 mm (L×W×H)
11. Machine Weight: Approx. 180 Kg.     III.Sheet material tensile testing machineJig display

The image above shows just one type of clamp for a sheet material tensile testing machine. Clamps can be redesigned and customized according to the specific material properties.