I. Product Applications
The LT-801 model 10KN computer-controlled plastic tensile testing machine is primarily used for mechanical property tests such as tensile, compression, bending, tearing, peeling, shearing, and hoop stiffness on various non-metallic and metallic materials. The instrument consists of the measurement system, drive system, control system, and computer client operation software. Standard plastic tensile testing machines and dimension measuring instruments should be selected to ensure that the instruments used are calibrated within the calibration period, with capability verification and sample testing carried out after calibration or periodic verification of the plastic tensile testing machine. Properly control the test state, adjust the temperature, and standardize operations such as instrument zeroing and sample clamping.
II. Performance Features
High-precision force sensor with high accuracy and good linearity.
2. The power system utilizes stepper motor + driver + ball screw + synchronous belt drive, offering smooth operation and low noise.
3. The clamping fixtures have good coaxial alignment and the overall mechanical structure exhibits high rigidity.
4. High capacity for handling large data volumes, capable of simultaneously comparing and analyzing multiple test curves.
5. Professional safety equipment with overload automatic shutdown, up/down travel limit protection shutdown, and automatic power-off protection against leakage.
6. The software's operating interface allows for seamless switching between Chinese, English, and other minor languages. Test reports can be output in Excel or Word document formats.
III. Manufacturing and Testing Standards
Manufactured in accordance with the GB/T 2611 "General Technical Conditions for Testing Machines" and GB/T 16491 "Electrical Testing Machines" standards.
2. Certified and inspected in accordance with GB/T 12160 "Specifications for Extensometers Used in Single-Axial Tests" and GB/T 16825 "Inspection of Tensile Testing Machines."
3. Test Standards: Meets GB, ASTM, DIN, ISO, JIS, BS, and other standard requirements.
4. Technical Specifications
Sensor Range: 10KN
2. Test Force Resolution: 1/300,000
3. Test Force Indication Error: ±0.5% of indication
4. Displacement Rate Range: 1-500mm/min (Customizable as requested)
5. Test Space: 900mm (including clamp)
6. Test Width: 350mm
7. Large Deformation Extensometer Error: ±1mm
8. Relative Positioning Error: ±0.5% of the indicated value
9. Sampling Frequency: 120 points/second
10. Test Force Measurement Range: 0.4%-99%
11. Constant Force Deformation Range: 0.5%-99%
12. Power Supply: 220V / 50Hz
13. Power: 400W
14. Machine Dimensions: Approximately 530×900×1600mm (Length × Width × Height)
15. Machine Weight: Approx. 180 Kg.
V. Standard Configuration List
One main unit.
A set of specialized fixtures.
A set of test software.
1. One desktop computer and one color printer each.
5. Relevant power and data cables;
6. Large Deformation Extensometer
