Product Name:LT-4000CMiniCompounderLab-Specific

One.       Application: 

   LT-4000CIts primary function is to ensure the product meets the quality and color requirements specified by the customer. To fulfill the customer's requirements, further Translate Please provide the Chinese content that needs to be translated into American English. Inspection The results and their ratios are used for the production line, and this machine is specifically designed to uniformly mix the test materials and additives.

Section II       Features：

a)                       Compounding Room Volume:1LThe weight is related to the density of the material; the denser the material, the heavier the weight.

b)                      ⑵ Main Motor: AC motor, power5.5KWkW

⑶ Gearbox: Base and frame are constructed with low-carbon steel welding, equipped with a forced lubrication circulation system.  

       ⑷  Rotor Double-edge, synchronous rotor structure (also available for design and manufacturing according to customer-provided rotor structure drawings),The ratio of the front and rear impeller speeds1：1.20OrSTSynchronous rotor, cast steel case-hardened treatment, hard chrome plated surface; ball bearing roller bearing; lubricated with bearing oil bath; maximum rotor speed:1.0L：36Please provide the Chinese content to be translated./Minute

⑸ Studying the wall: steel structure, drilledHeatingHard chrome plating treatment on the inner surface.

Bracket: Steel structure, internally treated with hard chrome plating for hardened surface.  

⑺ Top栓: Cylinder-driven, hard chrome-plated surface  

⑻ Face Seal: High-wear-resistant material seal ring, self-lubricating bearing, hinge spring pressing seal

        ⑼ Feeding hopper: Manual operation

        ⑽ Control Methods: Manual, semi-automatic, and automatic operation available.Maximum temperature of the refining machineRoom Temperature to200°

III. Technical Parameters:

Section 4: Mechanical Main Body        

        Base Rack        Welded from steel sections and plates, processed into shape         

4--2        Mixing Room        The middle slot is made of wear-resistant alloy steel, cast and processed, with a water jacket designed for cooling water use.

Side walls are constructed from medium carbon steel plate, welded and processed.

4--3        Agitator shaft        Axle and blade assembly20crMoCasting,Stainless steel welding rod processed, shaft and blades

All are hollow, capable of passing cooling water.

4--4        Bearing Housing        Inclined discharging sectionZG20Cast steel,With the other three piecesHT250Cast Iron,All processed,Ball bearings for use

4--5        Material Feeding Device        This mechanical design features a front feeding device.(Dust cover), Pressure can be adjusted to user specifications

4--6        Leakproof device        The mixer shaft side end employs a mechanical shaft seal tensioning.,Material: Glass Epoxy Fabric,Axial end and shaft seal tension,The contact surface is wear-resistant treated and equipped with an oiling port.;Pressurized lid with four sides featuring a new panel design

Tighteners,Material: Glass Epoxy Fabric

Five.        Pressure Cap Assembly                                        

5--1        Pressure Cap        Forged from wear-resistant steel and finished for use,Equipped with water jackets,Coolant water compatible;Apply pressure to the raw materials during blending operations,Using an air cylinder for vertical up and down movement

Six.        Discharge Equipment

6--1        Structure        Utilize worm gear structure for the tilting and unloading of the mixing room

6--2        Tilt Angle        Maximum110°～135°

6--3        TiltedActivePower        Pneumatic

Seven.        Transmission structure        

7—1    Main Motor  5.5KW AC

7—2    Transmission Method         R77Primary motor and reducerPlease provide the Chinese content you would like translated into American English.Body transmission

Section 8: Pipefitting        

8--1        Air Compressor Pipe Fitting        Compressed Air Accessories(Three-point combination,Electromagnetic Valve)Mechanical body piping

Nine. Primary electrical control equipment 

9--1        Temperature Setting:Automatic and manual options available

9--2        Prompt action,Various time settings,Alarm device;Reversible

Ten.        Advantages of the machine unit

10--1        Key electrical components are imported brands from Taiwan's Shilin or Tainan, with the entire machine's bearings using Timken from the USA.TWBBrand

10--2        The mixing shaft is made of nickel-chromium-molybdenum alloy steel. Wear-prone areas are reinforced with imported German wear-resistant high-speed steel, offering greater strength and durability.

10--3        Mixed tank "Shan" type,The main body of the mixed tank is made of wear-resistant alloy steel, cast as a whole.,Welded German Dura-SteeL at the cutting area, followed by hard chrome plating.,Water jacket for cooling

10--4        Side wall leak prevention device made of high-tech materials: epoxy glass cloth high-pressure die-casting; features include: wear resistance, easy maintenance, no chemical reaction, leak-proof sealing ring, and wear-resistant ring.Intermediate oil filling port, extendable seal ring lifespan

10--5        Pressure lid is made with “MMolded structure for more uniform rubber compound mixing