ZX-800 Semi-Automatic Wall Cutting Machine, Concrete Wall Cutting Machine, Door and Window Opening Grooving Machine

Cutting Wall Machine/Wall saw machines are primarily used for building or old building renovation, reinforcement, and design changes, capable of cutting large wall sections such as door openings, windows, and elevator shafts. Manual feeding and cutting. The structure remains intact, formed in one go, which not only avoids the damage to building structures caused by traditional hammering construction but also saves time and resources on drilling circular排孔, as well as significantly reduces the time and cost for adjustments.

Concrete reinforced steel cutting wall machine is suitable for cutting or grooving reinforced concrete walls, brick walls, or stone materials, etc.

Concrete Reinforcement Cutting Wall Machine Maintenance and Inspection

Urgent: Do not plug in the power before checking the machine.

Here is the translation: - 本 (Běn) - This (used to refer to a specific item or product)MachineCumulative working time exceeds24HourClean and maintain the machine. Especially ensure the lubrication and smooth operation of the lifting screw rod on the main lifting rod of the lifting screw rod machine. (There should be no mud or debris, as this is beneficial for operation; otherwise, it may damage the machine.)

1Inspect saw blades

Reduce cutting efficiency with worn-out blades and avoid motor overload; timely replace the blade arrow.

2Inspect wheel

Inspect the base underneath16The wheel only slips or gets stuck or fails.,The gap between the wheel and track must not exceed0.2mmLoosen the slider wheel fixing nut, and adjust the corresponding hex set screws on both sides of the base.

3Regular inspections

Monthly inspection required: Ensure the parallelism between the blade's direction of travel and the track. The distance between the leading edge of the blade and the track must not exceed1 mm,Otherwise, the concrete may jam the blade during cutting, reducing cutting efficiency..If not parallel, it can be6mmLoosen the hexagon wrench from the center seat.4Double-speed box fixed screw.Adjust the parallelism of the tuning cone saw blade.