Hanging type grinding wheel machine Chongqing 5.5 kW Suspended Polishing Machine - Abrasive GrindingElectricGrinding wheel machine

Hanging type grinding wheel machine, also known as suspended grinding wheel machine. Primarily used for grinding stainless steel, titanium ingots, alloy steel, special steel, steel ingots, and cracks, carbide inclusions, burrs, and other impurities in various metals.

Hanging type grinding wheel machine  Operation Procedure

Check if the hanging item is secure before use.

  2、 First, observe if the motor is reversing. Normally, the grinding sparks should be shot towards the motor. Otherwise, shut down the machine immediately to check if the circuit is functioning properly.

3. After the grinding wheel machine is started, grinding should only be performed once the machine has reached a stable rotation. If there is significant vibration, the machine should be stopped immediately for adjustment.

Do not apply excessive force during the grinding process.

5. Select a grinding wheel that matches the spindle speed of the grinding machine according to the instruction manual.

6. New grinding wheels must have a factory certification or inspection mark. Do not use the wheel if defects such as quality issues, hardness, grain size, or cracks are found before installation.

7. When installing the grinding wheel, the clearance between the inner hole of the wheel and the main shaft should not be too tight. It should be adjusted according to the technical requirements for loose fit, generally controlled between 0.05 and 0.10 millimeters.