Wire Rope Sulfurized Splicing Head剥皮钳 Electric Belt Stripping Machine
Conveyor Belt Peeling Machine Technical Specifications:
Power, Voltage: 380V 50Hz
2. Power: 0.75 Kw, 1.1 Kw, 1.5 Kw
3. Weight: 32 Kg
4. Application Range: Various layered conveyor belts with joints, including EP, NN, cotton duck, and various widths from 650mm to 2200mm.
Wire rope diametermm | 3.0-5.5 | 6-7.5 | 8-8.5 | 9-9.5 | 10-10.5 | 10.5-11.5 | 12-13.2 |
Dull edge radiusmm | 3 | 4 | 4.5 | 5 | 5.5 | 6 | 6.5 |
4.Adjust剥壳机：① Confirm that the upper and lower blades are parallel. ② The pressure roller and lower blade are on the same vertical line. ③ The horizontal distance between the upper and lower blades is equal to the wire rope spacing (loosen the bolt on the upper blade clamp to move the upper blade position). ④After the actuating mechanism is tightened, adjust the distance between the pressure roller and the lower blade by turning the bolt. Ensure the wire rope stripping is even from top to bottom.
5.Place the cutting blade on top of a steel wire rope, tighten the operating mechanism, activate the electric traction machine, and the blade will uniformly strip the rubber from the wire rope.
6.The upper blade holds two steel wire ropes, the lower blade grips one, the operating mechanism is tightened, and the electric traction machine's cutting tool is activated, allowing for the even removal of rubber from the steel wire ropes, peeling off the rubber layer by layer from the inside.
Section 6: Usage Precautions:
1.The junction power supply must be handled by a professional electrician.
2.Secure the剥头机 during use to prevent slippage.
3.Confirm that the upper and lower blades are securely fastened. If not, it may damage the blades.
4.The gap between the upper and lower blades should match the spacing of the wire rope; otherwise, the blades may be damaged.
5.Are the upper and lower blades parallel, and is the traction position appropriate?
