Conveyor Belt Peeling Machine, Layered Belt Peeling Machine for Power Plants, Steel Rope Core Belt Peeling Head Machine

Function: Preparatory work for the vulcanization joint of wire rope core conveyor belts.

Features:

1. No need to flip the belt, as the steel wire is covered with rubber on both top and bottom.Clearing Can be completed in one go.

2. The thickness of residual adhesive on the steel wire can be arbitrarily controlled to ensure curing strength.

3.3. Compared to the traditional manual deheading method, it is more user-friendly, saves a significant amount of time, and greatly reduces labor intensity.

Application Fields:

Power plants, mining, steel mills, ports, petrochemical plantsThe head stripping system is designed to securely fasten and clean the outer adhesive layer attached to the steel wire rope core of the conveyor belt head during the preparation of belt joints, and can be used in various locations and situations.

2. The剥头机 system includes:

Cutting equipment, traction equipment, and alignment equipment

3. Technical Advantages of Wire Rope Conveyer Head剥机

（1.） Design for easy control of residual adhesive thickness on steel wire

（2.) Mechanical operation significantly enhances the appearance integrity of each steel wire, ready for direct use in vulcanization processes.

4. Easy to operate:

（1.) Generally, two people are needed to operate.

（2.) No need to flip the belt; the upper and lower covers can be sealed in one go.Clean up Compared to traditional manual deheading operations, the deheading speed is generallyIt takes 2 to 3 hours to strip one wire ferrule.  Enhance work efficiency and reduce labor intensity.

The剥头机parts are suitable for inclinations compared to the traditional manual stripping method.Steel wire ropes, 10-25mm in diameter, with rubber cover thickness up to 12mm on the running surface and 25mm on the load-bearing surface.

Usage Instructions:

Remove approximately 15 cm of wire rope from the end of the stripping tape for the wire rope. Remove the rubber sheath on both sides and secure the tape.

2. Install the upper and lower blades, aligning the lower blade with the center of the steel wire rope. Adjust the tension of the pressure roller bolts, press down on the handle, and move the motor frame through the steel wire rope connection. This drives the blades to detach the rubber from the wire rope, completing the stripping process.

Wire Rope Head剥皮机Technical Specifications:

Name: Wire Rope Conveyer Belt Stripper

Model:ZX-BTJ

Voltage:380V    50Hz

Power:3KW

Weight:96kg

Application Scope:Wire rope conveyor belts in various widths from 650mm to 2200mm.