Conveyor Belt Skinning Machine Usage Video

Application:  BPJ-4 Wire Rope Conveyor Belt Skinning Machine (hereinafter referred to as the Skinning Machine), powered by standard power supply, easy to operate, reliable in performance, lightweight for handling, capable of completing the stripping work for various wire rope conveyor belts, and widely used as auxiliary equipment for vulcanized joints of wire rope conveyor belts in industries such as metallurgy, mining, cement, power plants, ports, building materials, and chemicals. 

  Technical Specifications: 

  1★ Power Voltage: 380V 3-phase 50Hz 

  2★ Power: 3KW 

  3★ Weight: 96 kg 

  4★ Application Range: Wire Rope Adhesive Tapes for Various Widths 

  5★ Altitude not exceeding 2000M. 

  6★ Working environment temperature: -20℃ to +40℃. 

  7★ Relative humidity of air not exceeding 85%. 

  In environments with non-destructive insulation for gases or steam. 

  9★ Dimensions: 590×360×470mm 

  Order Instructions: 

  1★ Wire Rope V-Belt Width 

  2★ Wire Rope Tape Model or Wire Rope Diameter 

 】 Instructions: 

  First, peel out a section of about 15 centimeters wide steel wire from the end of the steel wire rope transport tape. Remove the rubber on both sides and secure the tape. 

  2. Install the upper and lower blades, aligning the lower blade with the center of the steel wire rope. Adjust the tension of the pressure roller bolts, press down on the handle, and move the motor frame via the steel wire rope. This action drives the blades to detach the rubber from the wire rope, completing the stripping process. 

  Use Instructions: 

  1. Power connection must be performed by a professional electrician. 

  2. Secure the剥头机 during use to prevent slippage. 

  3. Do not exceed the specified width during stripping.