BPJ-3 Conveyor Belt Peeling Machine  Electric Belt Peeling Machine  Wire Rope Sulfurizing Head Peeling Machine

Separation of coverings for conveyor belts, including fabric coverings, rubber coverings, and separation between fabric and steel wire rope cores.

Wire Rope Head Stripping Machine Technical Specifications:

Power, Voltage: 380V 50Hz

2. Power: 0.75 Kw, 1.1 Kw, 1.5 Kw, 3 Kw

3. Weight: 40KG, 45KG, 50KG, 55KG

4. Application Range: EP, NN, cotton duck, and various layered conveyor belts with joints, in widths ranging from 650mm to 2200mm.

Wire Rope Head剥皮机 Features:

1. Large stripping area and rapid speed significantly reduce labor intensity and minimize the time required for joints.

2. Lightweight for easy carrying and handling.

3. Operation stable.

Wire Rope Head剥皮机操作方法:

1. Align the conveyor belt centrally using standard methods; the corresponding joint should be cut open and separated into layers.

2. Place the conveyor belt stripping machine in the proper position and secure it with钢丝rope.

3. Power on.

4. Clamp the separated layer with a fixture, start the motor, and use a blade to score the peeled section at the appropriate location.

After removing the first layer, repeat the above steps to peel off the second, third layers, etc.

Wire Rope Head剥皮机 Usage Precautions:

1. Power connection must be performed by a professional electrician.

2. Secure the剥头机 during use to prevent sliding.

3. Do not exceed the specified width during stripping.