Sulfurized Joint Repair Peeling Tool, Stripping Machine, Peel Clamp

Usage:  BPJ-4 Wire Rope Conveyor Belt Peeler (hereinafter referred to as the peeler), powered by standard electrical supply, easy to operate, reliable in performance, lightweight for transportation, capable of peeling various wire rope conveyor belts, and widely used as auxiliary equipment for vulcanized joints of wire rope conveyor belts in industries such as metallurgy, mining, cement, power plants, ports, building materials, and chemicals. 

Technical Specifications:

 1★ Power Voltage: 380V 3-phase 50Hz 

  2★ Power: 3 kW 

  3★ Weight: 96 kg 

  4★ Application Range: Wire Rope Belts in Various Widths 

  5★ Altitude not exceeding 2000M. 

  6★ Working environment temperature: -20℃ to +40℃. 

  7★ Relative humidity not exceeding 85%. 

  8★ In environments with non-destructive insulation for gases or steam. 

  9★ Dimensions: 590×360×470mm 

  Ordering Instructions: 

  1★ Wire Rope Tape Width 

  2★ Rope Tape Model or Rope Diameter 

  Instructions for Use: 

  Remove approximately 15 cm of steel wire from the end of the stripping tape for wire rope. Remove the rubber sheath on both sides and secure the tape. 

  2. Install the upper and lower blades, aligning the lower blade with the center of the steel wire rope. Adjust the tension of the pressure roller bolts, press down the handle, connect the motion to the motor frame via the steel wire rope, and the blade will pull the rubber away from the wire rope, completing the stripping process. 

  Use Instructions: 

  1. Power connection must be handled by a professional electrician. 

  2. Secure the剥头机 during use to prevent sliding. 

  3. Do not exceed the specified width during stripping.