BPJ-3 Standard Conveyor Belt Peeling Machine Application: Separation of cover rubber and canvas, cover rubber and steel wire rope, and canvas among various woven core, steel wire rope core conveyor belts; Technical Parameters of Standard Conveyor Belt Peeling Machine: 1. Power Supply, Voltage: 380V 50Hz; 2. Power: 0.75Kw, 1.1Kw, 1.5Kw; 3. Weight: 32KG, 41KG, 50KG; 4. Application Range: EP, NN, cotton canvas, and various layered belt joints, standard conveyor belts with widths ranging from 650mm to 2200mm; Features of Standard Conveyor Belt Peeling Machine: 1. Large peeling area and fast speed, significantly reducing labor intensity and the time required for joints; 2. Lightweight for easy carrying and handling; 3. Stable operation; Usage Method of Standard Conveyor Belt Peeling Machine: 1. Align the conveyor belt centrally as per standard methods, and use a knife to cut and separate the corresponding joint and one layer; 2. Place the peeling machine at an appropriate location and secure it with a steel wire rope; 3. Connect the power supply; 4. Clamp the separated layer with a fixture, start the motor, and use a blade to cut the peeling section at the appropriate location; 5. After peeling one layer, repeat the above steps to peel the second, third layers, etc.; Safety Precautions for Using Standard Conveyor Belt Peeling Machine: 1. Power connection should be done by a professional electrician; 2. Secure the peeling machine to prevent sliding during use; 3. Do not exceed the specified width requirements during peeling.