BPJ-3 Wire Rope Stripping Machine for Tape Splicing Machine

Function: Preparatory work for vulcanization joints of steel wire rope core conveyor belts.

Features:

1. No need to flip the belt, as the steel wire is covered with rubber on both top and bottom.Clear out Can be completed in one go.

2. The thickness of residual adhesive on the steel wire can be arbitrarily controlled to ensure vulcanization strength.

Compared to traditional manual deheading methods, it is more user-friendly, saving a significant amount of time and greatly reducing labor intensity.

Application Fields:

Power plants, mining, steel mills, ports, petrochemical facilitiesThe head剥头机system is used to secure and clean the adhesive layer attached to the outer sheath of the steel wire rope core of the belt head conveyor during belt joint preparation. This operation can be used in various situations and locations.

2. The剥头机 system includes:

Cutting device, traction device, and track guidance device

3. Technical Advantages of Wire Rope Conveyer Head剥机

（1.） Design for easy control of adhesive thickness on steel wire

（2.) Mechanical operation significantly enhances the appearance integrity of each steel wire, making it directly applicable for vulcanization processes.

4. Easy to operate:

（1.) Typically, a team of two is sufficient to operate.

（2.) No need to flip the belt; the upper and lower covers can be sealed in one go.Clearing Compared to traditional hand peeling operations, the peeling speed is generallyIt takes 2 to 3 hours to strip one wire ferrule.  Enhance work efficiency and reduce labor intensity.

The head stripping section is suitable for an inclination angle that compares to traditional manual stripping methods.10-25mm steel wire ropes, with diameters ranging from 4.9mm to 12.5mm, featuring rubber coverings that are up to 12mm thick on the running surface and up to 25mm thick on the load-bearing surface.

Instructions for Use:

Remove approximately 15 cm of wire rope from the end of the stripping tape for wire rope handling. Peel off the rubber on both sides and secure the tape.

2. Install the upper and lower blades, aligning the lower blade with the center of the steel wire rope. Adjust the tension of the pressure roller bolt, press down the handle, and connect the motor frame via the steel wire rope for movement. This will drive the blades to detach the rubber from the steel wire rope, and the stripping process will be complete.

Wire Rope Head Stripping Machine Technical Specifications:

Wire Rope Conveyor Belt剥头机

Model:ZX-BTJ

Voltage:380V    50Hz

Power:3KW

Weight:96kg

Application Range:Wire rope conveyor belts in various widths from 650mm to 2200mm.