Large Casting Grinding Wheel Machine M3140 Suspended Grinding Wheel Machine Zirconium Steel Corundum Grinding Wheel Segment

Hanging type grinding wheel machine, also known as suspended grinding wheel machine, mainly used for grinding stainless steel, titanium ingots, alloy steel, special steel, steel ingots, and cracks, carbon inclusion, burrs, etc. in various metals.

Check the hanging object for stability before use; Purpose: Grinding stainless steel, titanium ingots, and alloy steel.

Operation Procedure:

Check the stability of the suspended object before use.

2. Upon first use, observe if the motor reverses. Normally, the grinding sparks should shoot towards the motor; otherwise, immediately shut down and check if the circuit is functioning properly.

3. After the grinding wheel machine is started, grinding should only be performed once the machine has stabilized. If there is significant vibration in the grinding wheel machine, it should be stopped and adjusted immediately.

4. Do not apply excessive force during grinding.

5. Select a grinding wheel that matches the spindle speed of the grinding machine according to the instructions provided.

6. New grinding wheels must have a factory-certified quality certificate or inspection mark. Do not use the wheel if any defects such as quality issues, hardness, particle size, or cracks are found before installation.

7. When installing the grinding wheel, the clearance between the inner hole of the wheel and the spindle should not be too tight. It should be adjusted according to the technical requirements for loose fit, generally controlled between 0.05 and 0.10 millimeters.

Operating Principle:

Upon equipment startup, the grinding wheel and dust collector activate simultaneously. Dust particles generated from the workpiece grinding are drawn into the sedimentation chamber by the negative pressure of the fan. Large and heavy particles of dust fall directly into the ash drawer, while fine dust is carried by the air flow into the filter box. As the dust passes through the filter bags, it adheres to the surface, and the purified gas is then blown into the clean room by the fan, after which it is discharged into the atmosphere through noise reduction. After operating for a period and shutting down, the dust cleaning motor automatically starts to vibrate and clean the filter cores, shaking off the dust adhered to the filter cores into the ash collection (or unloading) tray. The vibration time is adjustable.