I. Introduction
PSKDY8/80WBG-GF portable explosion-proof fire monitor with long-range shooting, featuring remote control operation of the cannon body and head from a distance. This design benefits operators by keeping them away from the scene, effectively avoiding hazards. The series is also equipped with a manual device for manual operation in the absence of power. The cannon series boasts high flow rate, collapsible support legs, easy operation, flexibility, reliability, and ease of storage and transportation. Particularly suitable for high-risk areas with toxic, flammable, and explosive hazards, such as oil fields, oil depots, airports, ports, large buildings, petrochemical industrial areas, old city districts where fire trucks cannot enter, and underground shopping malls, etc., it is an indispensable equipment for fire safety facilities.
Section II: Performance and Parameters Table for PSKDY8/80W Portable Explosion-Proof Fire Extinguisher
Section 4: Introduction to Water Cannon Features
1. Direct Current, Atomization: Press the corresponding button on the control box or remote control for direct current and atomization functions. Release the button to stop.
2. Ascend/Descend: Hold the corresponding button on the control box or remote control. The cannon head can ascend within the range of +30° to +70° (this angle prevents side tipping, do not move the designated limit) or descend. Release the button to stop.
3. Left and Right Rotation: Hold the corresponding button on the control box or remote control, and the cannon body rotates within a horizontal 90° range. Release the button to stop. The cannon body will automatically stop at the end of the left and right travel.
Five: Shutdown
Turn off the power switch of the control box.
6. Power Supply
PSKDY8/80WBG-GF water cannon with a 24V DC high-efficiency battery, rechargeable for repeated use, maintenance-free.
2. The battery operates normally with a voltage below 24V, and the motor starts slowly. To ensure reliable standby, the battery voltage should be checked frequently to be above 25V, and charging should be initiated when the current display is below 24V.
3. The charger is equipped with a dedicated plug. Simply connect the charger to the control box's dedicated socket for charging. Charging is indicated by a red light, which turns green automatically when fully charged. The normal full charge voltage is around 26.50V.
4. The charger comes with charging precautions, please read them carefully.
