I. DR-GS Series Hydraulic Oil Introduction
Product Name | Performance specifications | Features and Applications | |||
Viscosity (40℃mm2/s) | Flash Point (Opening, °C) | Viscosity Index | Flowing Point | ||
Abrasion-resistant Hydraulic Oil | 32 | 210 | 100 | -15 | Abrasion-resistant, anti-oxidation, de-foaming, suitable for high-temperature and high-pressure hydraulic equipment |
46 | 220 | 100 | -12 | ||
68 | 230 | 100 | -10 | ||
High-grade wear-resistant Hydraulic Oil | 32 | 215 | 105 | -28 | High-performance, wear-resistant oil-pressure press for specialized use, hydraulic presses, stamping machines, construction machinery for high-pressure hydraulic equipment |
46 | 225 | 105 | -25 | ||
68 | 235 | 105 | -20 | ||
High-performance, grayless, anti-wear hydraulic oil | 32 | 230 | 120 | -33 | High viscosity index, low-temperature fluidity, excellent antioxidant stability, circulating hydraulic system, long-life ashless hydraulic oil |
46 | 240 | 120 | -33 | ||
68 | 250 | 120 | -31 | ||
Section II - Introduction to DR-GS Series Thermal Oil
Product Name | Performance specifications | Features and Applications | |||
Viscosity (40℃ mm²/s) | Flash Point (Opening, °C) | Viscosity Index | Flowing Point | ||
Low-Temperature Heat Transfer Oil | 32 | 220 | 105 | -15 | Equipment for use at an export temperature of 250°C |
68 | 240 | 105 | -17 | ||
High-temperature thermal oil | 20 | 200 | 120 | -17 | Export temperature for conduction at 300℃ |
Section 3: Introduction to DR-GS Series Gear Oils
Product Name | Performance specifications | Features and Applications | |||
Viscosity (40℃ mm²/s) | Flash Point (Opening, °C) | Viscosity Index | Flowing Point | ||
Extreme Pressure Gear Oil | 68 | 234 | 109 | -23 | Extreme pressure gear oil in this series is suitable for general gear transmission systems and reducer rotating gear rings, oil bath lubrication |
100 | 248 | 109 | -22 | ||
150 | 244 | 109 | -13 | ||
220 | 254 | 100 | -13 | ||
320 | 258 | 100 | -13 | ||
460 | 260 | 100 | -13 | ||
680 | 318 | 100 | -13 | ||
Section 4: Packaging and Storage
Products passing the factory inspection should be used within twelve months; if not used within the deadline, they can only be used after re-testing and passing. The DR-GS series industrial lubricants are packaged in 200-liter iron drums or 25kg plastic drums, stored indoors (temperature 5-40℃).
