(1) Product Name

Silicone rubber insulated heat-resistant soft cables

Standard of Execution

Q/12JH4065.1-2002

Application Scope

This product is suitable for high-temperature environments such as steel and smelting industries, with an alternating current rated voltage300-500V、450-750V、1140VVarious electrical equipment motor leads and connectors.

Utilize Features

1.Rated Voltage:U0/UPlease provide the Chinese content to be translated.300/500V、450-750V、1140V。

2.Long-term allowable operating temperature for the cable conductor does not exceed180℃。

3.The laying temperature of the cable should not be below-60℃。

4.Recommended bend radius:

Flattened flexible cables should have a minimum bending radius not less than the cable's smaller side dimension.15Multiple.

Other cables should not be less than the outer diameter of the cable6Multiple.

Model

Cable model

Cable specifications

 (II) Product Name

Fluoropolymers insulated high-temperature power cable

Standard of Execution

Q/12JH4066.1-2002

Application Scope

This product is suitable for fixed installation at rated voltageU0/UFor0.6/1KVWithin the transmission and distribution lines under high-temperature environments and below.

   Flame-retardant cables are primarily used in applications with high fire safety requirements. This product maintains all performance indicators of standard cables of the same voltage level and specifications, such as high mechanical and physical properties, excellent electrical performance, and resistance to chemical corrosion. Additionally, it features flame-retardant properties, preventing the spread of fires caused by cables and reducing significant losses of life and property.

   Low-smoke, halogen-free flame-retardant cables, in addition to maintaining the general characteristics and electrical properties of flame-retardant cables, also feature reduced smoke generation during combustion, minimal release of hydrogen chloride gas, and low corrosiveness.

Low-smoke, halogen-free flame-retardant products not only meet the requirements for flame-retardant cables but also feature minimal halogen acid gas release, low smoke generation, reduced corrosion, and excellent flame-retardant properties.

Utilize Features

1.Rated Voltage:U0/UFor0.6/1KV。

2.Long-term allowable operating temperature for cable conductors:

FFType not exceeding200℃。

ZR-FV、ZR-FV22Type not exceeding105℃。

DL-FV、WL-FV、DL-FV22、WL-FV22Type not exceeding90℃。

3.The laying temperature of the cable should not be below0℃, below0℃Must be preheated prior to laying.

4.The bending radius of the cable should not be less than the outer diameter of the cable.15Multiple.

Model Name

Specification Structure

(3) Product Name

Fluorinated plastic insulated silicone rubber sheathed high-temperature power cables

Execution Standards

Q/12JH4066.0-2002

Application Scope

This product features high-temperature and low-temperature resistance, softness, and corrosion resistance, and is suitable for industrial and mining enterprises in power generation, metallurgy, chemical industry, and petroleum industries.0.6/1KVFor connecting electrical power transmission lines to industrial mobile electrical equipment in harsh environments and below.

Utilize Features

1.Rated VoltageU0/UPlease provide the Chinese content to be translated.0.6/1KV。

2.The long-term allowable operating temperature of the cable conductor does not exceed200℃。

3.The laying temperature of the cable should not be lower than: Fixed laying-60℃。

                           Non-permanent installation-20℃。

4.Recommended bend radius:

Unarmored cables should not be less than the cable outer diameter of6Multiple;

The electrical cable should not be less than the cable's outer diameter by10Be;

Cables with armor structures should not be less than the outer diameter of the cable.12Multiple.

Cable Model and Name

Cable specifications

 (4) Product Name

Flat Soft Cable

Standard of Execution

Q/12JH4065.0-2002

Application Scope

This product is suitable for rated voltage0.6/1KVCranes, hoists, trolleys, boring machines, starting trailers, and other mobile equipment's power and lighting lines, and below.

Utilize Features

Rated VoltageU0/UFor0.6/1KV。

Long-term allowable working temperature for cable conductors does not exceed70℃。

Cable laying temperature shall not be lower than-40℃。

The flexible flat cable should allow a bend radius not less than the size of the cable's smaller side.15Multiple.

Cable Model and Name

Cable Specifications

 (V) Product Name

Shielded power cable for variable frequency circuit

Execution Standards

Q/12JH4066.3-2002

Application Scope

This product is suitable for rated voltage0.6/1KVShielding requirements and strict power transmission lines, as well as power distribution lines, for systems compatible with variable-frequency motors. This product boasts excellent shielding capabilities, while also serving as a central neutral protective conductor.

Product Features and Usage Characteristics

1.Utilizes shielding that can resist static coupling, electromagnetic induction, radio waves, poor grounding, and interference from power cable conduction.

2.The shield layer (conductor within) utilizes a phase wire encapsulation. When zero sequence or high-order harmonic current components appear in the circuit, the total current within the shield layer (coaxial conductor) sums to zero, thereby not causing electromagnetic interference to the outside environment.

3.Low and uniform positive (reverse) and zero sequence impedance, it is beneficial to improve power supply quality when compared to the common four-core power cable.

4.The reactance value of the shielding layer (concentric conductor) under the zero-sequence operating condition is significantly lower than that of the fourth core conductor in a standard power cable, thus being advantageous for the application of new-type short-circuit automatic protection devices and ensuring the safe operation of the cable and other related equipment.

5.A certain proportion of the shielding layer and the main core cross-section of the cable.PEProtective function.

6.Double-layer composite shielding achieves an interference attenuation ratio of104Thus, ensure any external interference has no impact on the system.

7.Recommended Allowable Bend Radius: Cylinder for Cable Bend Test2Multiple.

8.Combustion characteristics

（1）      Bundle flame-retardant cables can withstandCB/T19380.3-BCategoryIEC332-3Regulated bundle combustion test.

（2）      Fire-resistant cables can withstandGB/T12666.6(IEC60331)Specified fire resistance test

Model

Cable Model and Name as shown in the table1Regulation

Specs