The Microbial Limit Test Device is made of stainless steel metal. The test sample is injected into the Microbial Limit Incubator, filtered through the instrument by vacuum pump negative pressure, trapping the microbes in the filter membrane. The membrane is then removed using a membrane retriever and transferred to a prepared solid culture medium, with the bacterial surface facing up and flat. The lid is sealed to form a closed culture box, which is then placed in the corresponding incubator at a constant temperature for culturing and counting.
Application Range:
Disease Control: River, River, Lake, Sea, Water Samples
Food: Pure Water, Mineral Water, Beverages
Pure water,注射用水,active pharmaceutical ingredients,capsules,biologics,tablets,oral preparations
Chemical Industry: Various water samples requiring microbial testing Cosmetics: Various water used and products
Key Features:
1. Integrated ultra-compact design minimizes space occupation on the laminar flow bench.
2. Pre-sterilized filter membranes, ready to use upon opening, minimize the main pollution source to the lowest level, enhancing test reliability.
3. The filter cup utilizes a lip seal design without using clamps or O-rings, ensuring leak-proof operation and consistent microbial recovery rate.
4. Can filter multiple membranes simultaneously, significantly enhancing work efficiency.
5. Available in various sizes, we offer disposable PP filters, reusable stainless steel and glass filters for easy operation.
Each filter head is controlled independently, allowing operators to use them flexibly.
7. Oil-free vacuum pump design, low noise.
8. The instrument surface is mirror-finished for easy cleaning and disinfection.
9. The filter head can be flame-sterilized quickly, facilitating continuous experimental operations.
10. Equipped with an internal imported diaphragm liquid pump, no need for an external suction flask; the liquid is directly pumped out through the diaphragm pump, reducing the hassle of using a suction flask.
11. Aesthetically pleasing handles are distributed at both ends of the base, enhancing its stability.
12. The stable low-center design prevents tipping when fully loaded with solution.
Technical Specifications:
Applicable Filter Membrane Diameter: Φ47mm/50mm
2. Effective Filtration Diameter: 40mm
3. Filter Cup Capacity: Disposable filter cups available in 100/250ml sizes, stainless steel filter cups in 150ml, glass filter cups in 120ml; other custom capacities are available.
3. Filter Head Quantity: 1/3/6
4. Testing Method: Membrane Filtration Method
5. Filtration Method: Diaphragm pump vacuum filtration, no need for vacuum flask.
6. Flow Rate: 100ml/15s
7. Sterilization Methods for Filter Heads: Steam Sterilization, Flame Gun Quick Sterilization
8. Filter Head: Detachable.
