One, Cangzhou Fangzheng Weighing Equipment's designed car hydraulic flip-top unloading device can handle: sand and stone, rare earth, scrap steel, wood chips, plastic, grain, coal powder, etc. It is a modern material unloading equipment that can automatically unload materials directly upon reversing onto it—no problem at all, saving time, effort, and money, with high speed, efficiency, and reliability; with a high unloading efficiency and minimal dust. This equipment is suitable for ports, various warehouses, resource recycling, scrap steel power plants, processing factories for automatic unloading of bulk materials; and it is also widely used in chemical, metallurgical, mining, and any units and departments that handle bulk material reception operations. Cangzhou Fangzheng Weighing Equipment can manufacture 300-ton capacity automatic flip-top unloading machines.
II. Features of Hydraulic Flip Plate:
1. Flip Platform Structure: Features a six-steel beam composite design; strong rigidity; upgraded from traditional Q235 to alloy material Q345; will not deform during the lifting process.
2. Within a certain range, the tilt angle can be arbitrarily set and adjusted by the operator.
3. Equipped with multiple wheel locks, suitable for any car model, semi-trailers, front four and rear eight, high-sided trailers, etc.
4. Special lifting devices ensure lifting power, enhance equipment stability, and improve the safety and reliability of equipment operation.
5. Equipped with a synchronous detection system for real-time correction. Accuracy within 1mm. Ensures smooth up and down movement during unloading. If the set value is exceeded, the system will automatically lock and alarm, displaying the cause of the fault to prevent any accidents.
6. Pipe Burst Protection System: In the event of extreme conditions during the production process (such as external damage and bursting of the pipeline), this system will automatically activate to stop the hydraulic flap, preventing a sudden and uncontrolled descent.
7. Power Failure Protection System: Equipped with a manual safe descent system. The platform can be safely lowered even during a power outage.
Section 3: The rear flip unloading machine with side supports is a type of automotive bulk material handling equipment, widely used by units and departments in industries such as chemicals, steel, grain and oil, feed, coal, and cement that handle bulk material reception. It includes both conventional angle rear flip unloading machines and high-angle rear flip unloading machines. The high-angle rear flip is used for unloading bulk materials with poor self-flowing properties, such as coal, ore, and cement. The conventional angle rear flip unloading machine is commonly used for unloading bulk materials with good self-flowing properties, such as grain and oil, feed, chemicals, and coal.
The rear dump unloading machine features an unloading angle up to 60 degrees, suitable for difficult-to-unload materials such as loose, high-moisture content ores.
2. The oil cylinders use imported models with few failures and long service life; the main components of the hydraulic system (pumps, valves, seals) are selected from imported products. All hydraulic systems and components undergo equipment cleaning and testing before assembly. Long-term use ensures stable operation without clogs or oil leaks.
3. Entirely PLC-based with remote operation, offering simplicity, safety, and reliability.
Phone Contact: 13931720511
