One, Cangzhou Fangzheng Weighing Equipment's designed car hydraulic flip gate unloading device can unload: sand and stone, rare earth, scrap steel, wood chips, plastic, grain, coal powder, etc. It is a modern material unloading equipment that can automatically unload materials upon reversing in place, everything is fine, saving time, effort, and money, with high speed, efficiency, safety, and reliability; with high unloading efficiency and minimal dust. This equipment is suitable for ports, various warehouses, resource recycling, scrap steel power plants, processing plants for automatic unloading of bulk materials; and it is also widely used in chemical, metallurgical, mining, and any units and departments that handle bulk material reception operations. Cangzhou Fangzheng Weighing Equipment can manufacture an automatic flip gate unloading machine with a load capacity of 300 tons.
Section II: Features of Hydraulic Flip Plate:
1. Flip-plate platform structure: Features a six-steel beam composite design; high rigidity; upgraded from traditional Q235 steel to alloy material Q345. It will not deform during the lifting process.
2. Within a certain range, the inclination angle can be arbitrarily set and adjusted by the operator.
3. Equipped with multiple lockable wheel chocks, suitable for any car model, semi-trailers, 4-axle/8-axle trucks, high-sided trailers, etc.
4. Special lifting devices ensure lifting power, enhance equipment stability, and ensure the safety and reliability of equipment operation.
5. Equipped with a synchronous detection system for real-time correction. Precision of 1mm. Ensures smooth up and down movement during unloading. If the set value is exceeded, the system will automatically lock and alarm, displaying the fault cause, ensuring no accidents occur.
6. Pipeline Burst Protection System: In the event of extreme conditions during production (such as external damage and bursting of the pipeline), this system will automatically activate to stop the hydraulic flap, preventing sudden uncontrolled descent.
7. Power Failure Protection System: Designed with a manual safe descent system. The platform can be safely lowered even during power outages.
Section 3: The side-supported rear unloading vehicle machine is a type of automotive bulk material handling equipment, widely used in units and departments in industries such as chemicals, steel, grain and oil, feed, coal, and cement, which have bulk material receiving operations. It includes two types: conventional angle rear unloading vehicles and high-angle rear unloading vehicles. The high-angle rear unloading is used for bulk materials with poor self-flowing properties such as coal, ore, and cement. The conventional angle rear unloading is commonly used for bulk materials with good self-flowing properties like grain and oil, feed, chemicals, and coal.
1. The rear flip unloading machine offers an unloading angle of up to 60 degrees, making it suitable for difficult-to-unload materials like ore with poor bulk density and high moisture content.
2. The hydraulic cylinders are imported with minimal failure and long service life; the main components of the hydraulic system (pumps, valves, seals) are selected from imported products, and all hydraulic systems and components are cleaned and inspected before assembly. Long-term use ensures no clogging, no oil leakage, and stable operation.
3. Entirely PLC-based with remote operation, offering simple, safe, and reliable operation.
Phone Contact: 13931720511
