One, Cangzhou Fang Zheng Weighing Equipment's designed car hydraulic flip-top unloading device can unload materials such as sand, stone, rare earth, scrap steel, wood chips, plastics, grain, coal powder, and more. It is a modern material unloading equipment that allows for automatic direct unloading simply by reversing onto it. It's hassle-free, time and labor-saving, and cost-effective; offering high-speed, efficient, and reliable performance; with a high unloading efficiency and minimal dust. This equipment is suitable for ports, various warehouses, resource recycling facilities, scrap steel power plants, and processing plants for automatic unloading of bulk materials. It is also widely used in chemical, metallurgical, mining, and any units or departments that handle bulk material reception operations. Cangzhou Fang Zheng Weighing Equipment can manufacture an automatic flip-top unloading machine with a load capacity of 300 tons.

Section II: Features of Hydraulic Flip Plate:

1. Flip Platform Structure: Features a six-steel beam composite design; strong rigidity; upgraded from the traditional Q235 steel to alloy material Q345. No deformation during the lifting process.

2. Within a certain range, the tilt angle can be arbitrarily set and adjusted by the operator.

3. Equipped with multiple braking wheel assemblies, suitable for any car model, semi-trailers, front four and rear eight axles, high-sided trailers, etc.

4. Special lifting devices ensure lifting power, enhance equipment stability, and improve the safety and reliability of equipment operation.

5. Equipped with a synchronous detection system for real-time correction. Precision of 1mm. Ensures smooth up and down movement during unloading. If the set value is exceeded, the system will automatically lock and alarm, displaying the cause of the fault, to ensure no accidents occur.

6. Pipeline Burst Protection System: In the event of extreme conditions during the production process (such as pipeline external damage and bursting), this system will automatically activate to stop the hydraulic flap, preventing a sudden, uncontrolled descent.

7. Power Failure Protection System: Equipped with a manual safe descent system. The platform can be safely lowered even during power outages.

Three, the side-supported rear unloading vehicle machines are a type of vehicle unloading equipment for bulk materials, widely used in units and departments in industries such as chemicals, steel, grain and oil, feed, coal, and cement that handle bulk material receiving operations. It includes two types: conventional angle rear unloading vehicles and high-angle rear unloading vehicles. The high-angle rear unloading is used for bulk materials with poor self-running properties, such as coal, ore, and cement. The conventional angle rear unloading vehicles are commonly used for bulk materials with good self-running properties, such as grain and oil, feed, water, chemicals, and coal.

1. The rear flip unloading machine features an unloading angle up to 60 degrees, suitable for difficult-to-unload materials like ore with poor granularity and high moisture content.

2. The oil cylinders are imported with minimal failure and long service life; the main components of the hydraulic system (pumps, valves, seals) are selected from imported products, and all hydraulic systems and components are cleaned and inspected before assembly. Long-term use ensures no clogging, no oil leakage, and stable operation.

3. Entirely PLC controlled with remote operation, simple, safe, and reliable.

Phone Contact: 13931720511