Wuxi Yijin Airlock Description:

Airlock chambers, as auxiliary equipment for cleanrooms, are primarily used for transferring small items between clean zones and non-clean zones to minimize the number of times cleanroom doors are opened and to greatly reduce contamination in the clean zones. They are widely used in micro-technology, biological laboratories, pharmaceutical factories, hospitals, food processing industries, LCD factories, electronic factories, and all other places requiring air purification.

Airlock is an auxiliary equipment for cleanrooms, primarily used for transferring small items between clean zones and between clean and non-clean areas to minimize the number of times the cleanroom door is opened and reduce contamination to a low level. Made of stainless steel plate, it is flat and smooth. The double doors are interlocked, effectively preventing cross-contamination, equipped with electronic or mechanical interlock devices, and fitted with UV sterilization lamps.

Airlock usage:

A device designed to minimize door openings within a clean room, used primarily for transferring small items between different grade cleanrooms or between clean and non-clean areas, to prevent unclean air from entering the cleanroom during material transfer, thereby significantly reducing the extent of contamination within the cleanroom.

Pass-through window usage instructions:

Airlock is managed according to the cleanliness level of the higher-grade clean zone it is connected to.

The interlocked transfer window between the coding area and the filling area should be managed according to the requirements of the filling area. After work hours, the operator from the clean area is responsible for wiping all internal surfaces of the transfer window clean and turning on the UV sterilization light for 30 minutes.

Material entry and exit from the clean area must be strictly separated from pedestrian corridors and must be accessed through the production workshop's dedicated material channels.

Upon material entry, the production supervisor organizes personnel to remove packaging or clean the raw materials externally, then transfer them to the temporary storage room for raw materials in the workshop via the transfer window. The outer packaging of inner packaging materials is removed in the external temporary storage room, and then sent to the inner packaging room through the transfer window. The workshop coordinator and the supervisors of the formulation and inner packaging processes handle the material handover.

When transferring through the pass window, the "open and close one door at a time" rule must be strictly followed, with both doors not opening simultaneously. After placing the material into the outer door, close it first, then open the inner door to remove the material, close it, and repeat this cycle.

When materials are to be removed from the clean area, they should first be transported to the relevant intermediate material station and then removed from the clean area in the reverse order of their entry.

All semi-finished products must be transported from the clean area through the pass window to the temporary storage room outside, then transferred via the logistics channel to the outer packaging room.

Materials and waste that are highly polluting should be transferred from their designated pass windows to the non-clean area.

Upon completion of material in and out, it is essential to promptly clean the site of each packaging room or intermediate station and the transfer window, close the doors of the internal and external channels of the transfer window, and ensure thorough cleaning and disinfection.

Pass-Through Window Design Features:

The case surface is available in either cold-rolled steel plate with spray painting or full stainless steel plate, ensuring a beautiful appearance.
2. The work area is made of 304 stainless steel plate, which is flat, smooth, and wear-resistant.
3. The two doors are equipped with mechanical or electronic interlocking devices to prevent both doors from being open simultaneously.
4. The pass window is equipped with a dedicated seal, ensuring airtightness.

Worktop Surface:

The work surface of the short-distance pass-through window is made of stainless steel plate, which is flat, smooth, and wear-resistant.

The work surface of the long-distance transfer window utilizes a powered roller, making the transfer of items easy and convenient.

Stainless Clean Steel Transfer Window

One-Way Airlock Product Advantages:

1. Utilizing curved corners that are more suitable for cleanroom principles.
2. Outer wall is made of high-quality cold-rolled steel plate with powder coating or SUS304 stainless steel material.
3. The work surface of the short-distance transfer window is made of stainless steel plate, smooth, shiny, and wear-resistant.
4. The work surface of the long-distance transfer window utilizes a powered roller, making the transfer of items easy and convenient.
5. Both doors are equipped with mechanical or electronic interlocking devices to ensure that both doors cannot be open simultaneously.
6. The air outlet of the wind nozzle achieves a wind speed of over 20 seconds.
7. Utilizing a non-divided high-efficiency filter with a filtration efficiency of 99.99%, ensuring purification to a Class 1000 level.
8. Utilizes high-performance EVA sealing material, ensuring excellent sealing properties.
9. Utilizes imported electronic components, ensuring reliable performance.
10. Compatible with intercom walkie-talkies or work status indicator alarm lights.

Purification Industry Brand Enterprises

○ Top 100 leading companies in the manufacturing sector, invited to participate in the CCTV "Quality" program.

○ China's Ministry of Commerce and Ministry of Foreign Affairs recommend the company to be featured on the NASDAQ big screen in the U.S.

○ Superior equipment and technical personnel, patented innovation, construction grade qualification.

Quality Assurance - Tailor-Made

Over 20 years in the industry, accumulating substantial engineering experience.

○ Robust technical capabilities, with engineers, technicians, and multiple professional construction teams.

○ All design proposals offered can pass national standards certification, pharmaceutical GMP, and food supervision SC certification!

Extensive case history, exported worldwide

○ Partners with global Fortune 500 companies such as Coca-Cola, Nestlé, Volkswagen, and General Motors.

○ For over 20 years, we have successfully completed hundreds of exemplary purification projects across the nation.

○ Engineering contracts in Russia, Spain, Saudi Arabia, India, Mexico, and other countries and regions.

Professional Manufacturer, Dedicated Service

○ Direct factory to customer connection, no middleman, more competitive pricing.

○ Reasonably designed, cost-effective, and standardized engineering projects to create a clean environment for customers.

○ Integrated services, 7*24 customer support with backend assistance, worry-free after-sales.