Compared to traditional roof insulation materials, the roof foam concrete insulation offers a significant advantage in terms of overall cost-effectiveness.
Stable thermal performance meets building energy-saving requirements
Foam concrete for roofing is typically made from dry materials like cement, offering stable thermal properties. The thermal conductivity of foam concrete ranges from 0.06 to 0.12 W/m, with high thermal resistance. The thermal conductivity of the product can be controlled by adjusting the mix ratio after calculation based on the design, making the control process straightforward and the performance consistent. It is suitable for large-scale pouring.
2. Strength and bulk density adjustable
Foam concrete is a lightweight thermal insulation material with a compressive strength of 0.5 to 1.2 MPa and a finished density of 300 to 400 kg/m³. It can be adjusted and controlled programmatically to meet engineering requirements. Using foam concrete as roof insulation material, especially for walkable roofs, offers unique advantages. It completely resolves the issues of insufficient strength and short service life of traditional insulation materials.
3. Lower water absorption rate
Foam concrete contains a large number of isolated bubbles, evenly distributed, with a relatively low overall water permeability.
4. Three-in-one process, quick installation
Process in one, reducing traditional process steps. Foam concrete on-site operation, one unit with 6 people, daily output of 100-120 m3/unit, no need for additional auxiliary equipment, fast construction speed.
5. Good fluidity and density.
Foam concrete features unique liquid and tough foaming properties, with strong fluidity, allowing for long-distance pumping up to 300 meters and below 100 meters in height. It boasts high injection capabilities, high level of mechanization, and can be directly poured using hose pumps. It effectively fills dense material in hard-to-reach areas.
6. Direct waterproofing, no need for leveling, sloping, or protective layers.
