Rexroth frame module 3842174302, Shanghai Weimi Electromechanical Equipment Co., Ltd. main product, Sales hotline: 13524123009; Contact person: Lei Qing; Product real photos, original factory packaging, reasonable prices; Warmly welcome new and old customers to inquire and purchase!
REXROTH Standard Frame Module
3842174302
Standard corner modules with side lengths ranging from 160 to 400 mm
320 mm Frame Extension Module
Material:
- Angle/extension module with PA (polyamide) wear-resistant pad
- Corner/Expansion Module (PA) with Wear-Resistant Pad Made of PE (Polyethylene)
For total weight mW over 50 kg and conveyance speed vN over 12 M/min, reinforced frame modules are required.
Acceptable for use with WT 2 Load Plate
Frame modules are used for self-assembly of workpiece trays. The PA basic solution is suitable for conveyors/toothed belts and flat-top chain conveying media.
Frames with PE wear-resistant pads are required for conveying media using double-row chains and pile roller chains. PE cushion pads are not suitable for accumulation and operation on ESD flat top chains.
REXROTH LINAK TS 2plus Conveying System
1. Rexroth REXROTH Workpiece Trays
REXROTH WINDLADER WT 2/E Workpiece Tray
3842352171
⑵ REXROTH WIRTH WT 2 Workpiece Trays
0842090030
0842090032
0842090034
0842090039
0842090041
0842090043
0842090048
0842090050
0842090051
0842090080
0842090081
0842090083
0842090086
0842090088
3842523405
⑶ REXROTH WIT 2 Workpiece Tray Components
① Rexroth REXROTH Standard Frame Module
3842174301
3842174302
3842174303
3842174304
3842513458
3842526760
3842526761
3842526762
3842526763
3842526764
② REXROTH Reinforced Frame Module
3842525998
3842528292
3842525999
3842528293
③ REXROTH positioning bushes
3842174341
3842524614
3842524615
④ REXROTH Collar-Type Center Shafts
3842525846
⑤ REXROTH定位销
3842532812
⑥ Rexroth REXROTH bolts
3842525803
3842525804
3842525805
⑦ REXROTH Load Plate
3842174311
3842174313
3842174315
3842174321
3842174323
3842174325
3842174331
3842174333
3842174334
3842174375
3842174376
3842174378
3842174381
3842174383
3842523381
3842524594
3842524595
3842524596
3842524597
3842524598
3842524599
3842524600
3842524601
3842524602
3842524603
3842524604
3842524605
3842524606
3842524607
3842524608
3842524609
3842538307
3842538308
3842538309
3842538310
3842538311
3842538312
3842538346
3842548684
3842548685
3842548686
3842548687
⑷ REXROTH WIRTH WT 2/H Workpiece Tray
3842998751
3842998755
⑸ REXROTH力士乐WT 2/H Workpiece Tray Components
① REXROTH Hycraft WT 2/H Workpiece Tray Assembly
3842998756
② REXROTH Load Plate
3842548405
3842548407
3842548408
3842548409
3842548410
3842548411
3842548412
3842548413
3842548414
3842548415
3842548416
3842548417
3842548418
3842548419
3842548420
3842548421
3842548422
3842548424
3842548425
3842548426
3842548439
3842548440
3842548688
3842548689
3842548690
3842548691
3842548692
3842548693
3842548694
3842548695
3842548696
3842548697
3842548698
3842548699
③ REXROTH RE 2/H Positioning Sleeve Kit
3842531354
⑹ REXROTH WET 2/F Frame Work Part Trays
3842999941
⑺ REXROTH WET 2/F-H Frame Workpiece Trays
① REXROTH WIRTH WT 2/F-H Frame Workpiece Trays
3842998757
② REXROTH R+W WT 2/F-H Positioning Bushing Kit
3842530529
Rexroth VE 2 clutch brake
0842900300
Pneumatic Stopper
Inclined stopper; can be opened, will not cause wear on the contact surface of the workpiece tray.
No reversibility in operation allowed
Stop one or more stack workpiece trays at the designated workpiece tray stop surface. Upon pressure release, the stopper closes through a spring, simultaneously stopping the workpiece tray. Installed inside the conveyor roller, directly mounted on the conveying section.
Total weight of workpiece trays: 200kg
Operating Temperature 0 ... +60℃
Required compressed air ports 4 ... 6bar
Pneumatic pressure fit φ4mm
Including fastening materials for installation on ST 2/... conveying sections
Pneumatic Components
0842900300
Version VE 2
Separator VE 2
Pneumatic Separator
Flipper machine; openings without wear on the contact surface of the workpiece carrier
No reverse operations permitted
Can be combined with WT 2/E, WT 2, WT 2/F, and WT 2/LS
Product Features
Delivery Notice
Installation
Rated Speed [m/min]
6,9,12,15,18
Material Specifications
Shell: PA 6, Lock Handle: Brass, Locking Bolt: PA 66
Scope of Delivery
Including installation materials for installation on conveyer line ST 2/…, pneumatic components.
Total Part Carrier Mass [mG][kg] 200
Operating Temperature [T]: 0 ... +60°C
Pneumatic Insert Fitting [?][mm] 4
Required compressed air connection [pmax][bar] 6.
Required compressed air connection [pmin][bar] 4.
Note
High-temperature separator as requested
Total part carrier mass [mG] multiplied by [kg]
200,140,100,70,50
Recommended Accessories
Rear Panel VE 2/RS, Switch Bracket SH 2/..., Position Inquiry
Weight [kg] 0.430
Linde REXROTH Standard Frame Module
3842174302
Standard corner modules with side lengths ranging from 160 to 400 mm.
320mm Frame Expansion Module
Material:
- Angle/extension module with PA (polyamide) wear-resistant pad
Corner/Expansion Module (PA) with Wear-Resistant Pad of PE (Polyethylene)
For total weight mW > 50 kg and conveying speed vN > 12 M/min, reinforced frame modules are required.
Acceptable for use with WT 2 Load Plate
Frame modules are used for self-assembly of workpiece trays. The PA basic solution is suitable for conveyors/toothed belts and flat-top chain conveying media.
Frames with PE wear-resistant pads are required for conveying media over double-row chains and piled roller chains. PE buffer pads are not suitable for stacking operation on ESD flat-top chains.
Rexroth REXROTH separator
VE-VF Separator
VE-VF/M Separator
Separator for reliably stopping the separation of workpiece trays
Suitable for installation at a later time, without the need to interrupt the side guide device.
The separator can be installed at any location.
Switch bracket, for installation on a separator, with a high storage load of 50 kg
Offer two specifications:
VE-VF for dry or oily environments
VE-VF/M for corrosive applications
Brake Stopper VE-VF 3842528852
Supply Range Includes Fixed Materials
REXROTH REXROTH Sliding Stop Block VA 2/50 - Reversible
3842191721
Sliding stop block, pneumatic lifting available
Integrated switch bracket
reversible operation
Not applicable to ST 2...-H conveyor section
By sensor to detect the upper position of the sliding stop block
Can be used with WT 2 and WT 2/F
Sliding blocks are used for lateral conveying sections connected to two or more bus conveying sections and requiring auxiliary stoppers. Once activated, the lateral lifting device can transport the workpiece tray into the longitudinal conveying section. During system voltage reduction, the pneumatically adjustable sliding blocks extend to the lower end position. Sensors located exactly within the roller tracks of the conveying section can detect the upper position of the sliding blocks.
REXROTH Load Wheel
Bear Wheel D58X30 MITTELBORD
3842218940
3842218944
Support roller, for constructing pulley or roller section
Mounted on profiles with 10 mm keyways
Utilizing large-diameter deep groove ball bearings for excellent operational characteristics.
Bearings with flanged wheel, guiding in 10mm keyed grooves
Anti-static Conductive
Bosch-Rexroth support wheel
Supporting roller wheel, for constructing pulley or roller section
Mounted on profiles with 10 mm keyholes
Utilizing large-diameter deep groove ball bearings for superior operational characteristics.
Bearings with flanges, guiding in 10mm keyways
Anti-static conductive
Rexroth REXROTH cartridge-type container
Position small parts on the workstation or on the material conveyor stand
The surface design conforms to ergonomics for easy and stable gripping.
Can be combined with card holder and cover
3842344752 Cardboard Container GB-1210 Light Grey
Bosch-Rexroth Flange Nuts, T-Bolts
Countersunk Nut M8
3842345081
Nut, 10 mm, Locking Groove, M8
Fixed and conductive connections
Bolt end indentations are used for marking the correct position.
Precision profiling: Not required
Galvanized steel
Rexroth WI 2 Lever
Pendulum WI 2 BQ=240
3842348781
3842530309 Paddle Switch Sensor
Regional Monitoring
Identify workpiece trays
Cease lateral conveyance of workpiece trays
Suitable for installation on conveyor sections with profiles of 45 mm width ST 2/... or on conveyor sections with profiles of 50 mm width ST 2/...-H.
Suitable for EPA-compliant environments
For workpiece pallets with a length ≤ 480 mm, a basic lever element is required.
For workpiece pallets with a length of ≥ 640 mm, two basic lever elements are required.
Joysticks are used in the following fields:
Regional Monitoring
Cease lateral conveyance of workpiece trays
Identify workpiece tray
According to the required functions, the WI/M, WI 2/... levers should be equipped with one or two sensors.
Total weight capacity of workpiece tray: 30kg (applicable total WT weight when feeding from the lateral section to the main section; for area monitoring, only the system's large weight of 240 kg may not exceed)
ESD
Joystick Weight M 1.5kg (weight of each arm, small WT)
Length L: 320mm
Monitoring Range: 270mm
Scope of Supply
Fasteners for installation on ST 2/... conveying sections or BS 2/... conveyor sections.
Rexroth Communication Module ID 200/C-...
ID 200/C-PDP（PROFIBUS-DPV0）
ID 200/C-ETH (Ethernet)
3842410061
Communication Module ID 200/C-PDP
The function of the communication module is to establish a connection between the antenna and the control system.
It offers plug-in interfaces commonly used for two antennas, enabling simultaneous operation at different frequencies. Alternatively, digital sensors can be connected to each antenna. Parameters and diagnostics are set through an integrated web server.
ID 200/C-ETH
Establish a connection with the control system via Ethernet. In addition to TCP/IP, Profinet/IO, Modbus/TCP, and EtherNet/IP, Ethernet protocols can also be used. The built-in switch allows for wiring configurations other than the traditional Ethernet star topology.
ID 200/C-PDP
Establish a connection with the control system via PROFIBUS-DPV0. Connect the integrated web server via a separate RS-232 interface.
Portable Data Carrier MDT...L, suitable for 125 kHz
Portable Data Carrier MDT...L, suitable for 13.56 MHz
Flat Antenna A...F, suitable for 125 kHz or 13.56 MHz
Circular Antenna A...R, suitable for 125 kHz or 13.56 MHz
Communication Module C-... for PROFIBUS or Ethernet
Control System
Working Voltage: 20 ... 30 VDC, PELV
Wavelength ≤ 10%
Current Consumption: Max. 0.5 A (includes current consumption for 2 antennas)
Status Indicator - 7 LED
Type of Protection IP65
Shell Material: Aluminum; Powder Coating RAL 7035
Ambient Temperature: -25 … +70 °C
Storage Temperature: -30 ... +80 °C
Humidity max. 96%
Vibration Resistance: 3.5mm (10...55 Hz); 20g (55...2000 Hz)
Seismic and impact resistance: 70 g/6 ms, 18 cycles
Certification: EN 300330, ETS 300683, CE, FCC
Quality: 0.5 kg
Transmission Frequency: 125 kHz, 13.56 MHz
Connect RS232 PROFIBUS-DPV0
力士乐REXROTH Antenna ID 200/A -...
Antenna ID 200/A - ... F (Flat Antenna)
Antenna ID 200/A - ... R (Circular Antenna)
3842410063 Antenna ID 200/A-HR
Working Voltage 24 V (Voltage for Communication Module)
Shell Material: PBT/Stainless Steel
Ambient Temperature -25 … +70 °C
Storage Temperature -40 … +85 °C
Humidity max. 96%
Vibration Resistance: 1mm (10 ... 55 Hz); 5g (10 ... 2000 Hz)
Seismic and impact resistance: 30 g/11 ms, 18 cycles
Quality: 0.1 kg
Type of Protection: IP67
Transmission Frequency: 13.56 MHz
Write/Read Distance - Static 35 mm
Write/Read Distance - Dynamic 30 mm (Write/Read Distance - Dynamic: v = 20 m/min)
Small distance between two antennas - Multiplex operation 30 mm
Small distance between the two antennas - running simultaneously 80 mm
Antennas are used for reading and writing mobile data carriers MDT...L (125 kHz, low frequency) or MDT...H (13.56 MHz, high frequency). The antennas are specifically designed to operate on the communication module and are also powered by the module.
Antenna ID 200/A -...R (Circular Antenna)
Circularly designed antennas are particularly suitable for reading data carriers installed on the underside of workpiece trays. With the appropriate installation kit, other mounting scenarios can also be achieved.
Antenna ID 200/A - ...F (Flat Antenna)
Flat antenna design is optimized for side installation in transmission systems. With the appropriate mounting kit, other installation scenarios can also be achieved.
Portable Data Carrier MDT...L, suitable for 125 kHz
Portable Data Carrier MDT...L, suitable for 13.56 MHz
Flat Antenna A...F, suitable for 125 kHz or 13.56 MHz
Circular Antenna A...R, suitable for 125 kHz or 13.56 MHz
Communication Module C-..., suitable for PROFIBUS or Ethernet
Control System
Rexroth Frame Module 3842174302
