Based on the performance characteristics of natural stone powder coatings, the application of natural stone powder coatings is generally divided into the following three types of application techniques:

Example of Application for Concrete Wall Coating with Natural Stone Powder

Layered Approach Example 

1. Wall painting treatment

2. Special-purpose base material for wall repair

4. Leveling with natural stone powder coating by scraping (smearing)

3. Leveling Base Material for Scraping (or Smearing) Application

5. Scrape (Wipe) Natural Stone Powder Coating Surface

General thermal insulation wall natural stone powder coating method

Layered Approach Example 

1. Wall boundary painting treatment

2. Apply 2mm thick thermal insulation mortar

3. Wall Repair with Special Base Material

4. Leveling Base Material for Scrape (Spread) Application

5. Leveling with natural stone powder coating by scraping or spreading

6. Scrape (Wipe) Natural Stone Powder Coating Surface

General method for applying natural stone powder coating on block walls

Apply a layer of glass fiber mesh at the wall junction.

2. Wall Repair with Special Base Material

3. Leveling Base Material for Scrape (Smeared) Application

4. Leveling with natural stone powder coating by scraping (smearing)

5. Scrape (Apply) Natural Stone Powder Coating Surface

Construction Precautions

1. Prior to the wall painting work, clean the wall of loose dust, grease, sealants, and debris from the corners to ensure proper construction.

Industry surface is clean, and rust-proof paint is applied to metal items. Other walls should have protrusions removed that exceed the wall surface.5mm foreign particle

Just need to be clean, no special treatment required.

2. Professional Base Material Wall Repair: Utilize special base material for the mending of corners, with the concave angle being straightened using a square ruler and the convex angle being handled accordingly.

Method for stringing lines: Use an aluminum alloy straightedge with a protractor for the corner.

3. Level the base material by scraping, using a dedicated base material and liquid in a 3:1 ratio to mix into a uniform paste. Scrape...

The surface must be level and perpendicular, with layers applied evenly.(Note: If the base error is significant, it can be leveled in multiple stages; each pass should not exceed)

10mm)。

4. Leveling surface with stone powder paint, mixed evenly using natural stone powder fabric at a ratio of 2:1 by powder to liquid.

Flat, with minimal scratches, standard scraping(Note: Allow at least 2 hours between each cycle, dryness being the determining factor.)

5. Stone powder coating surface finishing, same material ratio per coat, requires sandpaper smoothing before the first coat, other...

Construction is nearly completed to prevent dust and other pollution. Requires two people to work together: one scraping and smoothing, the other collecting and leveling in the back.

Calendered. After drying, the surface is flat, smooth, and has a tactile feel. Clean the edges and corners, and ensure the finished product is well-protected.

Description: The detailed construction process is subject to the signed contract.

Note: The natural stone powder finish is divided into two types of powders (using trowel application technique) and liquid (using spray or roller coating technique)

)，Both products are made of the same raw material aggregates, developed for different usage purposes. The liquid product has a powder-like consistency.

Products of the same physical properties.