Guangzhou Tianmai Chemical Technology Co., Ltd. is a Sino-Japanese joint venture chemical company integrating R&D, production, and sales. For many years, with a comprehensive quality management system, excellent product quality, reasonable pricing, and exceptional service, the company has made great strides and gained a favorable reputation in the Chinese coatings market. It primarily produces and operates glass inks, glass paints, metal paints, floor paints, water-based paints, and other related chemical materials.

Two types of color difference occurrences

After the car body painting is completed, color differences usually occur in the following two situations:

1. The color was not sprayed properly.

Due to improper color ratio adjustment or issues with the painting process, the car paint has color variation and requires treatment.

2. Not fully dried

Another scenario is that the color appears deeper within the first month after painting, supplier of adhesive stone glue. This could be due to the car paint not being fully dried, which should resolve after one month. However, if the paint still appears deep after one month, it indicates an issue with the painting process, and it needs to be addressed promptly.

Causes of Paint Spraying Color Discrepancies

Many factors can affect the color variation in spray painting, and here we only introduce a few key points. Firstly, from the previous section, we can see that two significant causes of color variation are improper color ratio adjustments or issues with the spray painting process.

Guangzhou Tianmai Chemical Technology Co., Ltd. is a Sino-Japanese joint venture chemical company that integrates research, production, and sales. For many years, with a sound quality management system, excellent product quality, reasonable pricing, and services, the company has forged a favorable reputation in the Chinese coatings market. It primarily produces and operates glass inks, glass paints, metal paints, floor paints, water-based paints, and related chemical materials.

Water-based Metal Paint Application Process: 1. Surface Preparation Procedure

For newly constructed walls, thorough maintenance and drying are essential. For walls that have become damp and peeled, a new undercoat scraping is required. The substrate should be smooth, clean, free of oil stains, loose dust, or any other contaminants.

2. Solid-bottom paint roller coating process

First, uniformly roll-coat a layer of sealant primer on the base surface for sealing treatment to prevent color bleeding and moisture penetration from the base, which may contaminate and swell the outer coating, affecting the construction quality. Ensure even and consistent application to avoid missed spots.

3. Mid-process

After the undercoat has dried completely, you can proceed with the embossed spraying or textured rolling application. The embossing is done by spraying, with the spray points of similar size. Once slightly dry, use a roller to flatten them, achieving a decorative effect. This creates a three-dimensional embossed surface for the wall, adding an artistic atmosphere. Normally, the embossed paint dries within 24 hours after spraying. Then, sand it with 300-grit sandpaper. For the textured finish, use a roller to roll on the adhesive stone glue, ensuring even patterns and avoiding missed spots or joints.

4. Metal Paint Priming Coating Process

Before applying water-based metal paint, check if the embossed aggregate layer is completely dry. Wholesale adhesive stone glue, after sandpaper polishing, the metal paint primer is a colored paint, it must be applied evenly; it is recommended to apply two coats.

5. Spray Paint Coating Process

Apply the water-based metal paint finish by spraying, requiring two to three coats. First, apply a thin and even first coat, then allow it to harden for approximately 1-2 hours before applying the second coat.

6. Coating finish process

One coat of topcoat spray or roll-on is sufficient; both oil-based and water-based options will achieve the desired topcoat effect.

Product utilization rate, adhesive stone glue, low unit coating cost.

Guangzhou Tianmai Chemical Technology Co., Ltd. is a Sino-Japanese joint venture chemical company integrating scientific research, production, and sales. Over the years, through a comprehensive quality management system, excellent product quality, reasonable prices, and exceptional service, we have made great strides and achieved a good reputation in the Chinese coatings market. We mainly produce and operate glass inks, glass paints, metal paints, floor paints, water-based paints, and other related chemical materials.

The oil component penetrates deep into the wood, nourishing it and highlighting its natural texture and grain; the wax component prevents water from seeping in and enhances the hardness and smoothness of the wood surface. Wood wax oil is more environmentally friendly than water-based paint, but it doesn't cover up wood bugs or burls and can deepen color variations. It's suitable for solid wood furniture, showcasing the natural grain.

Adhesive Stone Glue Price - Adhesive Stone Glue - Tianmai 1688 (View) provided by Guangzhou Tianmai Chemical Technology Co., Ltd. "Choose Guangzhou Tianmai Chemical Technology Co., Ltd. for glass inks, glass paints, metal paints, floor paints, water-based paints, and other chemical materials." Located at Room 930, Anhe Business Building, No. 136 Yingbin Avenue, Huadu District, Guangzhou City, Tianmai Chemical has been committed to providing excellent service to customers for many years. Contact: Ms. Liu. Welcome to call, write, or visit for business discussions. Tianmai Chemical looks forward to becoming your long-term partner!