Waterborne polyurethane paintTMJ2K-M4

Application Range:This productWidespreadShouldForA variety of machinery and equipment.Protective coatings for metal surfaces such as stainless steel, aluminum alloy, galvanized plate, and ironware.CoatingDecorative，And protective coatings for the repair of original structures and the application of corrosion prevention systems on new pipeline structures for oil, gas, and water transmission, as well as gas cylinders.

Composition and Performance:ThePaintIt is a two-component mixed paint, divided into paint sections.ACuring agentBAll are ground from modified resins, cross-linking agents, pigments, etc., and can be dried naturally or baked.。

1. The coating has excellent adhesion, providing superior bonding strength to steel, galvanized steel, and light metals.

2. Excellent resistance to alternating dry and wet conditions, oil resistance, superior three-proof properties, and resistance to damp heat.

3. The coating dries quickly, is resistant to water, acids, alkalis, and salts, has good physical and mechanical properties, and can be baked at low temperatures.

4. High fullness, aging resistance, and film-forming properties.

Technical Specifications:

1、Solids content∶≥50±1%；

2、Gloss∶High gloss, matte；

3、Hardness∶2HAbove；

4Touch dry:15-20Minutes, fully cured:24~48Hour(s)

5. Flexibility:≤3mmAdhesion: ≤0Grade; reparative; ≤1Grade

Construction Methods and Precautions

1、Construction ratio (weight ratio): PaintA: Binder : Pure Water = 100:25; 25~75

2、AAfter opening the barrel of components, it must be well mixed, then under stirring, mixed according to the required proportions.BGroupCopyPouredAIn the composition, fullyMix thoroughly, allow to stand, mature30 minutesSubsequently, add appropriatePure WaterAdjust to construction viscosity.

3、Construction Method∶Spray painting, brush painting，Roll Coating;

4、Substrate temperature must be above the dew point3Above 5℃, the coating will not cure if the substrate temperature is below 5℃, hence it is not suitable for application.。

5、Dry Conditions∶Room temperature self-drying or drying60~100°C）X（30Minute)

6Attention: Ensure that the anti-rust primer and intermediate coat are fully cured before applying the topcoat, and that the surface is clean, dry, and free of contamination. Overcoating on surfaces that have not fully cured may sometimes cause color bleeding, pinholes, and other unknown defects.

Packaging and Storage：

1、Standard Packaging∶ 4kg/Drum 20kg/Bucket  Curing agent:1kg/Barrel2kg/Bucket

2、Store5-30Keep in a dry, well-ventilated area; shelf life will significantly decrease under high temperatures or exposure.

Colors: Transparent, Red, Orange, Yellow, Green, Blue, Black, White, Gold, Silver, etc., customizable colors available

 Guangzhou Tianmai New Material Technology Co., Ltd.