Sales Hotline: 18017746299
SYJP Series Oil Filter Machines
This equipment is specifically designed by our company for filtering and dehydrating medium to low viscosity hydraulic oils used in turbines, injection molding machines, die casting machines, stamping presses, etc. It integrates both oil filtering and efficient dehydration, successfully separating impurities, water, and gases from the oil. After the recycling process, the water content in the oil is less than 100ppm, and the particle impurities meet NAS 4-8 standards.
The specifications of this equipment:
High-performance polymer materials are used to replace traditional filters, filter papers, and cores, effectively resolving various clogging issues caused by oil sludge and biofilm contamination.
SYJPType Oil Filter Technical Specifications Sheet:
Model | SYJ P-1 | SYJ P -2 | SYJP-3 | SYJ P- 5 | SYJP-10 | SYJP-16 | SYJP-20 |
Processing VolumeL/H） | 60 | 120 | 180 | 300 | 600 | 900 | 1200 |
Voltage rating/Capacity(V/KW) | 380/0.25 | 380/0.35 | 380/0.5 | 380/0.55 | 380/0.75 | 380/1.1 | 380/1.5 |
Applicable Viscosity(cSt) | 320 | ||||||
Operating Temperature(℃) | 90 | ||||||
Design working conditions | Offline or Online Filtration | ||||||
Medium | Turbine oil, hydraulic oil, synthetic oils, and other petroleum-based products | ||||||
Oil tube in/Please provide the size. | Dg50/Pg16 | ||||||
Export oil with water content(PPm) | <100(Total moisture content) <50(Free Moisture) | ||||||
Particle size of export oil | NAS4~ 8 | ||||||
Ripeness of emulsification(min) | <15 | ||||||
Work PressureMpa） | <0.5 | ||||||
Imported PressureMpa） | >-0。045 | ||||||
Body design | Based on customer requirements | ||||||
Features and Effects:
1. Modular design, saving costs for your product's upgrades and replacements.
2. Restores clean with just one filtration: particle size up to NAS 4~NAS 8.
3. Features a one-time filtration degassing function, a feature not found in similar products. The water separation material achieves an effect with less than 100PPm water content in exported oil and less than 50PPm free water content.
4. High capacity for absorbing impurities, long service life, requires no frequent maintenance or replacement of parts.
5. Capable of removing sub-micron particles (such as sludge) that full-flow filters cannot.
6. Purify oil products using pure physical methods; separate moisture without heating, low electricity consumption, and cost-effective maintenance.
7. Oil-water interface sensor, flexible separation of water and waste discharge system, and monitoring system; discharge water meets national emission standards (optional).
8. The main oil pump features an internationally-level low-noise internal gear pump, equipped with an oil-pumping and filtering conversion device, convenient for dual-purpose use in oil-pumping or filtering.
9. Fully automatic control, with fault self-locking and dual mechanical and electrical protection, minimizing the occurrence of oil leakage accidents. Easy installation, simple operation, and fully automatic operation without the need for human supervision.
