Our company specializes in filter machines, oil filtering equipment, wastewater treatment equipment, equipment rental, and free sample trials upon request.
24-Hour Hotline: Xu (180-1774-6299)
SYJP Series Oil Filter Machine
This equipment is specifically designed by our company for the filtration and dehydration of medium and low viscosity hydraulic oils used in steam turbines, injection molding machines, die casting machines, stamping machines, etc. It integrates both the filtration of the oil and efficient dehydration, effectively separating impurities, water, and gases from the oil. After the recirculation treatment, the oil's water content is less than 100ppm, and particle impurities meet the NAS 4-8 standards.
The equipment's:
High molecular material is chosen to replace traditional filters, filter papers, and filter cores, effectively resolving various blockages in filter materials caused by oil sludge and biofilm contamination.
SYJPType Oil Filter Technical Specifications Sheet:
Machine Model | SYJ P-1 | SYJ P -2 | SYJP-3 | SYJ P- 5 | SYJP-10 | SYJP-16 | SYJP-20 |
Processing QuantityL/H） | 60 | 120 | 180 | 300 | 600 | 900 | 1200 |
Voltage Used/Capacity(V/KW) | 380/0.25 | 380/0.35 | 380/0.5 | 380/0.55 | 380/0.75 | 380/1.1 | 380/1.5 |
Applicable Viscosity(cSt) | 320 | ||||||
Operating Temperature(℃) | 90 | ||||||
Design work conditions | Offline or Online Filtering | ||||||
Medium | Turbine oil, hydraulic oil, synthetic oils, and other petroleum-based products | ||||||
Oil pipe intake/Available sizes | Dg50/Pg16 | ||||||
Export oil with water content(PPm) | <100(Total moisture content) <50(Free Moisture) | ||||||
Particle size of exported oil | NAS4~ 8 | ||||||
Ripeness degree(min) | <15 | ||||||
Job StressMpa） | <0.5 | ||||||
Import PressureMpa） | >-0。045 | ||||||
Body shape | As per customer requirements | ||||||
Features and Effects:
1. Modular design, saving costs on product upgrades and replacements.
2. Restores clean with just one filter: particle size up to NAS 4~NAS 8.
3. Features a one-time filtration de-emulsification function, which is not available in similar products. The water separation material achieves an effect with less than 100PPm water content in the exported oil and free water content below 50PPm.
4. High capacity for absorbing impurities, long service life, no need for frequent maintenance or replacement of parts.
5. Can remove sub-micron particles (such as oil sludge) that full flow filters cannot;
6. Purify oil products using a pure physical method, separate moisture without heating, low electricity consumption, and save maintenance costs.
7. Oil-water interface sensor, versatile separation system for water and waste, along with monitoring systems; effluent water meets national discharge standards (optional).
8. The main oil pump features an internationally advanced low-noise internal gear pump with an oil and filter conversion unit, convenient for dual-purpose oil extraction or filtration.
9. Full automatic control with fault self-locking, dual mechanical and electrical protection, minimizes the occurrence of oil leakage accidents. Easy installation, simple operation, and fully automatic operation with no need for human supervision.
