Our company produces filtration equipment, oil-water separator devices, wastewater treatment, low-temperature evaporation, and equipment leasing.
24-hour Hotline: 18017746299
SYJP Series Oil Filter Machine
This equipment is specifically designed by Jia Filter Co. for the filtration and dehydration of medium to low viscosity hydraulic oils used in steam turbines, injection molding machines, die casting machines, stamping, etc. It integrates both oil filtration and efficient dehydration, effectively separating impurities, water, and gases from the oil. After the recirculation process, the water content in the oil is less than 100ppm, and particle impurities meet the NAS 4-8 grade standards.
This equipment's:
High-performance polymer materials are used to replace traditional filters, filter papers, and cores, effectively resolving various clogging issues caused by oil sludge and biofilm contamination.
SYJP Type Oil Filter Technical Specifications Sheet:
Machine Type | SYJ P-1 | SYJ P -2 | SYJP-3 | SYJ P- 5 | SYJP-10 | SYJP-16 | SYJP-20 |
Treatment Volume (L/H) | 60 | 120 | 180 | 300 | 600 | 900 | 1200 |
Voltage/Capacity (V/KW) | 380/0.25 | 380/0.35 | 380/0.5 | 380/0.55 | 380/0.75 | 380/1.1 | 380/1.5 |
Applicable Viscosity (cSt) | 320 | ||||||
Operating Temperature (°C) | 90 | ||||||
Design working conditions | Offline or Online Filtration | ||||||
Medium | Gear oil, turbine oil, hydraulic oil, synthetic oil, etc. petroleum-based products | ||||||
Oil Tube In/Out Dimensions | Dg50/Pg16 | ||||||
Water content in exported oil (PPm) | <100 (Total Moisture) <50 (Free Moisture) | ||||||
Export Oil Particle Size | NAS4~ 8 | ||||||
Ripeness Degree (min) | <15 | ||||||
Working Pressure (Mpa) | <0.5 | ||||||
Import Pressure (Mpa) | >-0。045 | ||||||
Aircraft exterior design | Based on customer requirements | ||||||
Features and Effects:
Modular design, saving costs for your product's upgrades and replacements.
2. Restores clean with just one filter: particle size reaches NAS 4 to NAS 8 grade.
3. Features a single-pass filtration degassing function, with the oil export containing less than 100PPm water and free water content below 50PPm.
4. High dirt-holding capacity, long service life, and requires minimal maintenance and replacement of parts.
5. Capable of removing sub-micron particles (such as oil sludge), which is something full-flow filters cannot do.
6. Purify oil products using pure physical methods, with low electrical consumption and cost-effective maintenance.
7. Oil-water interface sensor, resilient separation of water and waste discharge system, and monitoring system; discharge water meets national emission standards (optional).
8. The main oil pump features a pump with an oil and filter conversion device, convenient for both oil extraction and filtration.
9. Full automatic control, with self-locking upon failure, featuring dual mechanical and electrical protection. Minimizes oil leakage incidents. Easy installation, simple operation, and fully automatic operation—no need for manual supervision.
