ProfessionalSandblasting room- Shot Blasting Room Manufacturing Company
Eco-friendly pneumaticSandblasting roomSandblasting roomFeatures:(Scroll down to view a large number of case photos for reference)
1.Sandblasting RoomLow overall operating costs, energy-saving;
2.Sandblasting roomUtilizing double-layer filtration, there will be no sand blockage in the backwash pipe.This ensures smooth recovery of the abrasive.
3.Sandblasting chamberUtilizing a honeycomb floor backfill structure, no need for excavation pits, significantly reducing land costs and construction time.
4. Simplify the structure; interlocking controls can be used across systems, significantly enhancing the ease of maintenance and repair.
5. Standard modular configurations for critical wear areas, easy to maintain and replace, thus avoiding heavy repair work.
6. The sandblasting room features an upper air supply and lower air suction to suppress dust and maintain a circulating system. Dust is constantly drained downward, ensuring high visibility within the room, a comfortable working environment for staff, and guaranteed quality and efficiency of the sandblasting operation; simultaneously, it protects the workers' physical and mental health.
7. The overall sand-suction floor can recover all sand material in one go, leaving no residue on the ground.Shot blasting roomThe indoor site is clean and tidy, requiring no manual cleaning, thus saving working hours. The air pipeline back sanding, with a high abrasive recovery rate of99%, easy for changing abrasive material.
8.Shot blasting roomThe overall technical performance is advanced, dust emissions meet and are below national and local environmental protection requirements, and thoroughly eliminate environmental pollution.
Manual operation procedures and methods
2.1 Turn on lighting, open the main gate.
2.2 Cart ExitShot blasting roomOuter, assembled workpiece.
2.3 Trailer EntryShot Blasting RoomInside, close the door.
2.4 Check equipment and environmental conditions; start the dust removal and recycling systems upon normalcy.
2.5 Sandblasting operators enter the room and put on the sandblasting protective suits and connect the breathing filter.
2.6 InitiateSandblasting MachineWorkers manually sandblast the workpiece.
2.7 Clean or sweep.
2.8 Open the door.
2.9 Vehicles WithdrawnSandblasting roomUnload workpiece.
Customization Requirements
Based on customer requirements and part dimensions, the housing working size is designed to18'x6'x6.5'Sandblasting roomBody adoptsA 100mm square tube forms the basic framework, with a 50mm square tube used for internal support. The interior is lined with 2mm steel plate and 3mm rubber sheet, while the exterior walls are constructed from 50mm thick colored steel sandwich panels for aesthetic appearance, easy installation, and corrosion resistance. The core of the colored steel panels is foam plastic, contrasting with the conventional use of solid steel plates.Sandblasting roomCompared to the body, it features the following characteristics:
（1) The body of the house has good corrosion, climate resistance, and waterproofing properties, allowing for outdoor placement.Sandblasting roomThe body is designed for outdoor use, requiring only a simple rain shelter to be set up, eliminating the need for additional factory construction, thus reducing infrastructure costs.2) Excellent soundproofing and thermal insulation properties:
Due to the sandwich color steel panels used in the sandblasting chamber body, with polyethylene foam as the core material, it offers excellent thermal insulation properties. It can effectively reduce the heat generated during the sandblasting process.High-frequency, sharp noises between 1500Hz and 2000Hz are reduced to below 500Hz, improving the noise environment.
（3) Sleek and aesthetically pleasing design:
Utilize steel sandwich panel structure.Sandblasting roomThe body can be molded in one piece, with a simple and smooth appearance, both aesthetic and durable. No need for further surface treatment or decoration work.
（4) Highly convenient for migration and transformation:
Sandblasting boothThe entire building section is designed in a modular style. Due to the inherent properties of the color steel panels, they are lightweight, easy to cut, and can be disassembled without a foundation. This allows for the free movement and addition or subtraction of units. It is particularly suitable for disassembly, relocation, and secondary use when necessary.
Our company specializes in customizing various models of automaticSandblasting Machine、Sandblasting chamberPaint booths, baking paint booths, shot blasting machines, spray guns, air compressors, and sandblasting accessories, etc. For any inquiries, please contact our business department promptly. Phone:0512-56795266 / 56795267 / 56795268 / 56795269 / 56715316
