All-in-one Wet Type Water Jet Sandblasting Machine, a new type of environmentally friendly dust-free rust removal equipment, where the product cleanliness can reach (SA 2.5-3.0 grade) after sandblasting.

Majun Sandblasting Equipment is one of the early manufacturers to produce sandblasting machines and their accessories, boasting a history of brand growth spanning many years.

Environmental issues have become a hot topic worldwide, particularly in our manufacturing sector where surface treatment environmental concerns are concerned. Shutting down operations, halting production, and closing factories to meet environmental requirements are no longer occasional occurrences; they now directly impact the survival of the manufacturing industry.

The wave of economic globalization and the call for solving global environmental issues have brought the relationship between environment and trade closer, prompting international organizations to establish a series of technical standards aimed at protecting the environment. How to prevent air pollution and achieve clean air environments remains a continually studied topic. Although our country has entered the ranks of the world's manufacturing powers, it is followed by air pollution. These fine particles in the air are harmful to human health. Therefore, controlling dust emissions is an important measure for our country to govern air pollution and achieve clean air environments.

Additionally, various manufacturing industries such as electronics and precision instrument processing demand higher air dust content standards. As a result, Meijun Sandblasting Equipment has become aware of the hazards of dust emissions to the environment and human health, and therefore, we are primarily promoting dust-free wet sandblasting to meet the requirements of environmentally friendly production.

That is: Type II Machine: High-pressure Water Jetting Machine, High-pressure Water Jetting Room, Series for Rust, Paint, and Oxide Layer Removal

Water and abrasive are mixed inside the sandblasting pot, then high-pressure air is introduced as power, forming a water-air-sand mixture, which is then喷射出去 through a sandblasting hose via a sandblasting gun. After the abrasive is ejected, it can be collected and immediately reused by adding water to the sand pot, making the Model II an ideal water sandblasting machine for both high-pressure water sandblasting and a sandblasting booth.

That is: Type II Pressure Sandblasting Machine + O-Type Negative Pressure Water Sand Platform = Water Sandblasting Room

1.1 Use

This machine utilizes a compressed air-powered ram-type working system to spray process parts using water and abrasive as mediums.

1.1.1 This unit can perform the following tasks:

1) Clean the oxidation scale and slag from heat-treated parts, welded parts, castings, forgings, etc., achieving a cleaning quality up to Sa3 grade.

2) Remove minor burrs and surface residues from machined parts;

3) Suitable for pre-treatment processing before surface coating or plating on workpieces, it provides an active surface to enhance the adhesion of the coating or plating layer.

4) Can be used to improve the physical and mechanical properties of workpiece surfaces, such as altering the surface stress state and enhancing the lubrication conditions of mating parts.

5) Also ideal for the renovation of old machinery parts (cleanliness up to Sa3.0).

1.1.2 Machine-Suitable Process

Suitable for water jet sandblasting and water jet peening processing.

1.2 Features

1) Flexible working methods, variable process parameters.

2) After sandblasting, the part surface hardens, enhancing the wear resistance and fatigue strength of the part.

3) Key components have long service life and are easy to maintain.

1.3 Key Technical Data

1.3.1 Abrasive Material

1) Water: Industrial tap water.

2) Water Consumption: Full capacity of 120kg per fill.

3) Abrasive Types: Recommended to use corundum abrasive, other abrasives are also permitted.

4) Abrasive Grain Size: 36# to 80#

5) Abrasive Usage: For corundum-type abrasives, the single addition should not exceed 130 kg.

1.3.2 Sand Pot

Vessel Capacity: approximately 0.3 m³; Abrasive Capacity: 0.12 m³.

1.3.3 Sandblasting Hose

ID: Ø25mm dedicated shot blasting hose.

3.4 Spray Gun

1) Quantity: 1 unit of manual spray gun

2) Nozzle Diameter: φ8mm

3) Operating Pressure (compressed air gauge pressure after startup): 0.5～0.7 MPa

4) Gas Consumption per Gun: Approximately 5 M3/min.

1.3.5 Total Gas Consumption: Approximately 6 M3/min.

1.3.6 Pipe Connector Size: Outer Diameter φ26

1.3.7 Work Conditions:

Compressed air source: Air source pressure 0.7 MPa, flow rate ≥ 6 M3/min [referring to the air volume flow rate at standard conditions (20°C, 101.325 KPa)].

Note: Users must provide the above working conditions themselves when using this machine!