Radar Level Gauge






The SBLD609 radar level gauge can measure up to 60 meters. The antenna has been further optimized, and the new, fast microprocessor enables higher-speed signal analysis and processing, making the instrument suitable for complex measurement conditions such as reaction vessels and solid material silos.
The radar level gauge antenna emits a narrow microwave pulse, which is transmitted downward through the antenna. Upon contacting the surface of the medium being measured, the microwave is reflected back and then received again by the antenna system. The signal is then transmitted to the electronic circuitry, which automatically converts it into a level signal (since microwave propagation is extremely fast, the time taken for the electromagnetic wave to reach the target, reflect, and return to the receiver is almost instantaneous).
Radar Level Gauge Features
Small antenna size for easy installation; contactless radar with no wear and no pollution.
2. Virtually unaffected by corrosion and foaming; almost immune to changes in humidity, temperature, and pressure in the atmosphere.
3. High dust environments have minimal impact on the operation of the high-frequency level gauge.
4. Shorter wavelength, better reflection on inclined solid surfaces.
Beamwidth is small, energy is concentrated, enhancing echo capability while also aiding in avoiding interference objects.
6. Smaller measurement blind spot, achieving good results even for small containers.
7. High signal-to-noise ratio, delivering superior performance even under fluctuating conditions.
8. High frequency is the choice for measuring solids and low dielectric constant media.
Radar Level Gauge Parameters:
Model: ULS51
Application: Temperature-resistant, pressure-resistant, slightly corrosive liquids
Measurement Range: 30 meters
Process Connections: Threaded, Flanged
Medium Temperature: -40~250℃
Process Pressure: -0.1 to 4.0 MPa
Accuracy: ±3mm
Protection Rating: IP67
Frequency Range: 26 GHz
Intrinsically Safe Rating: Exia II C T6 Ga/Exd ia IIC T6 Gb
Signal Output: 4...20mA/HART (two-wire/four-wire) / RS485/Modbus
Product Selection:
License |
P Standard Type (Non-Explosion Proof) Intrinsically Safe Type (Exia IIC T6 Ga) Type 4 intrinsically safe and flameproof (Exd[i]a]IIC T6 Gb) |
Antenna Type/Material |
A Φ46mm Stainless Steel 316L Bell Antenna B. 76mm Φ Antenna with Stainless Steel 316L C Horn Antenna Φ96mm / Stainless Steel 316L Y Special Customization |
Process Connection |
G Thread G1½" A/304 Stainless Steel NPT 1½" Thread / 304 Stainless Steel A法兰, DN50, 304 Stainless Steel B Flange, DN80/304 Stainless Steel C Flange, DN100/304 Stainless Steel Y Special Customization |
SealedProcess Temperature |
V Viton/(-40~150) ℃ K Kalrez/(-40~250) ℃ |
Electronic Unit |
2 (4~20) mA/24V DC two-wire system 3 (4~20) mA/24V DC/HART two-wire system 4 (4~20) mA/220V AC/4-wire system 5 RS485/Modbus |
Shell/IP Rating |
Aluminum/IP67 Q Plastic/IP65 |
Cable entry |
M M 20 x 1.5 N ½″NPT |
Live DisplayProgramming |
V-belt X Non-Woven |































