Guangdong No-Screw Adhesive Wholesale - Market Price - Manufacturer Da Zhu Wan No-Screw Adhesive boasts strong adhesion, capable of largely replacing nails. It doesn't require pre-drilling to fasten and bond materials such as wood, gypsum board, MDF, stone, cement tiles, metal, plastic, rubber, and more. Product Features: 1. High bonding strength and tensile strength. 2. Good flexibility, non-crisp, maintains adhesion during building contraction and movement. 3. Versatile, bonds most substrates, even wet wood. 4. Non-sagging, can fill gaps, can be painted after drying. 5. Weather-resistant with waterproofing properties. Application Method: - Clean the construction surface, ensuring no oil or dust. - Cut the tube opening, attach the nozzle, and use a sealant gun for dry bonding: (suitable for lighter objects and low-pressure joints) squeeze several lines of adhesive in a zigzag pattern, with each line 40 cm apart; press the adhesive side towards the bonding area, then gently pull it apart for a few minutes to allow the adhesive to dry, and finally press the two sides together. - Bonding method: (suitable for heavier materials) apply the adhesive as per the above method, then use clamps, nails, or screws to secure the bonding surfaces. Remove the clamps after the adhesive has dried (about 24 hours), allowing the adhesive to move and adjust the bonding position for 20 minutes. The bond becomes more stable within 2-3 days and achieves optimal results within 7 days. Precautions: - Clean the adhesive with kerosene before it solidifies, then scrape or sand off any exposed residue. - Use in a well-ventilated area, away from high temperatures or fire sources, stored in a cool, dry place: avoid contaminating water sources; discard the remaining product only after it has dried completely. 1. High-intensity bonding 2. Stronger, more durable 3. Suitable for all weather conditions 4. Bonds a wide variety of substrates