Guangdong Grout Adhesive Wholesale - Manufacturer - Sales Product Features: 1. Waterproof, anti-seepage, and strong adhesion; 2. Heat-resistant, UV-resistant, and acid/alkaline-resistant; 3. Certain elasticity, capable of resisting cracking caused by joint deformation; 4. No hollowing, peeling, scaling, or cracking when bonded to old surfaces, with guaranteed waterproofing; 5. Non-toxic, odorless, non-polluting, and environmentally friendly; 6. Available in various colors, with decorative effects. Tips for Color Selection and Matching: Principle 1: Contrast color matching. For example, black and white, dark and light, deep green and light gray can be used together. Repeated use of contrasting colors creates visual appeal, making the space stable but not monotonous. Principle 2: Analogous color matching. Using colors close to the same color scheme creates a sense of tranquility and elegance in the entire space. Reminders: 1. Due to differences in the base material's color transparency level and other reasons, there may be discrepancies between the actual construction effect and the color board, which is a normal situation. Please refer to the actual construction effect. 2. There may be slight differences in color effects between different batches of products. For large-scale construction, please choose products from the same batch or conduct a small-scale test before construction to ensure the decorative effect. 3. The construction temperature should be between 5°C and 35°C. When the construction environment temperature is low, the adhesive can be soaked in hot water for about 5 minutes to preheat before proceeding to the next step. Epoxy Adhesive is an upgraded product of grout adhesive, with obvious decorative and practical advantages over colored joint fillers. It solves the problems of unattractive and dirty grout lines in tiles. Traditional epoxy adhesive is applied on the surface of joint fillers, while the new type of epoxy adhesive does not require a filler base and can be directly filled into tile gaps after tile bonding. Suitable for filling gaps larger than 2mm, it is easier to apply than the ordinary type and is an upgraded product of joint fillers. Construction Tools: - Adhesive Gun - Used for applying the epoxy adhesive; - Sponge - Has three functions, works closely with the water scraper, can be used alone to level the adhesive, similar to a towel for cleaning; - Water Scraper - Used to level the adhesive; - Cleaning Tool - Wallpaper knife or grout adhesive cleaning tool (flat-head cylindrical screwdriver), used to clean out the grout from the tile gaps; - Water Basin - Used to wet a towel, clean the sponge and water scraper; - Towel - Wetted and used to moisten the 7cm edge of the tile on both sides of the gap; - Gloves - Worn to prevent the adhesive from getting on the hands.
