I. Product Performance Advantages:
Low administrative expensesNo boiler operation permit required; operators do not need a certificate of practice.
② High Efficiency and Energy Saving: Innovative structure, compact size, and high thermal efficiency.All indicators fully comply with national environmental protection requirements.The equipment features a new double-drum left-right structure, enhancing heat efficiency, stabilizing boiler pressure, and achieving a high energy conversion rate with an efficiency over 95%. Steam is produced in just 2-3 minutes, boosting work efficiency. The design incorporates both vertical and horizontal drum structures, with a flue gas recirculation process of 5 stages, and simultaneously implements a steam reheating mode, achieving the effects of dried steam and locally overheated steam. An evaporative fin-type preheater is installed at the end, further reducing exhaust gas temperature. The original cold water input is changed to 85-125°C water input (or this hot water can be used for other purposes), reducing the energy consumption of the equipment. A new type of thermal insulation material is used, which is lightweight, has minimal heat loss, and excellent thermal insulation properties. The combustion chamber is located at the top of the boiler, utilizing side-spray combustion technology and high-efficiency heat transfer elements to achieve complete combustion and maximum energy conversion. The water level alarm uses a 316 stainless steel electrode rod and polytetrafluoroethylene as insulation material. It is inserted from above, making it less prone to dirt buildup, reliable in performance, and long-lasting in use.
③ User-friendly operation:Fully Automatic Computer LCD Touch Screen ControlAutomatic pressure regulation, automatic water replenishment, automatic heating mode switching, high level of automation, one-touch button operation mode.
④ Safety: Features overpressure and water cutoff protection, dual safety valves, triple safety protection, ensuring reliability and safety.
⑤ Environmental Protection: Non-polluting, clean and hygienic, it is a new generation of energy-saving and environmentally friendly product.
⑥Wide Application: Suitable for school canteens, hotel dining halls, corporate dining rooms, and food steaming in institutions; also ideal for warming, chemical processing, garment processing, and laundry ironing processes. If the evaporation capacity of a single unit is insufficient, multiple units can be connected in parallel to increase the required evaporation capacity. The number of steam generators to be started can be determined based on the specific steam usage. Easy maintenance, with single-unit operation.
Section 7: Main Technical Parameters
Serial Number | Item | Specs | Unit | Serial Number | Item | Specs | Unit |
1 | Rated Evaporation Rate | 1000 | kg/h | 8 | Thermal Efficiency | ≥95% | |
2 | Rated Steam Pressure | 0.8 | MPa | 9 | Design Fuel | Diesel, natural gas, etc. | |
3 | Saturated Steam Temperature | 175 | ℃ | 10 | Fuel Consumption | 55-58 | kg/h |
4 | Water Supply Temperature | 20 | ℃ | 11 | Gas consumption | 75-80 | Nm3/h |
5 | Surface Area Subject to Heat | 43 | ㎡ | 12 | Total Quantity | 2750 | kg |
6 | Water Capacity | 29 | L | 13 | Power Supply | 380V, 50Hz, 2.6KW Power | |
7 | Preheater | Condenser finned | 14 | Dimensions: 3100×2300×2400 mm | |||
II. Configuration List:
(1) Engine WNS1-0.8-YQ | |||||
(II) Auxiliary Equipment | |||||
Serial Number | Name | Model and Specifications | Quantity | Unit | Note |
1 | Burner (Gas) | BTN85GN Proportional Adjustment | 1 | Tai | Battletech |
2 | Valve assembly | LN215(1-1/2″) | 1 | Set | Blue Energy |
Burner (Fuel) | BTN85LR (Double Segment Ignition) | 1 | Tai | Bettar | |
Daily-use oil canister | 1 | Set | Meitian | ||
3 | Control Box | 713Y15DQ2 Computer Control | 1 | Tai | LCD Touch Screen |
4 | Pump for water supply | 1100W Turbine Pump | 1 | Tai | Double-blade stainless steel impeller |
5 | Controller | Water Level Control | 2 | Just | Φ89×380 |
6 | Preheater | Condensing fin-type | 1 | Set | |
7 | Chimney | Φ300 | 4.5 | Rice | |
(3) Main Unit Accessories | |||||
1 | Pressure Gauge | Y150 0-1.6 | 1 | Only | Red Flag |
2 | Water-saving elbow管 | 3/8 | 2 | Root | 304 Stainless Steel |
3 | Level gauge | 3/8 | 2 | Payment | 304 stainless steel |
4 | Pressure Controller | LTK-D(6) | 2 | Only | 3/8 inch elbow |
5 | Drying probe | L=350 | 2 | Payment | Stainless Steel |
6 | Safety Valve | 0.82 Mpa | 2 | Only | DN25 |
7 | Main steam valve | DN50/DN25 | 2 | Just | Flange P2.5 |
8 | Inlet valve | DN25 | 1 | Just | Adjustable |
9 | Check Valve | DN20/25 | 6 | Only | High-temperature type |
10 | Wastewater Valve | DN40/25 | 4 | Only | High-temperature type |
11 | Exhaust gas outlet | DN40 | 1 | Just | |
12 | Electromagnetic Valve | DN20 | 2 | Just | 304 Stainless Steel |
13 | Blow-off valve | DN15 | 1 | Only | Su Ming |
14 | Pressure Relief Valve | 1.25 Mpa | 1 | Only | DN25 |
15 | Blow Molding Tank | DN15 | 2 | Set | |





































